Re: VFD Selection- alternate spindles
Posted by
turbulatordude
on 2004-04-13 21:37:15 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "george_barr"
<george_barr@y...> wrote:
A Mini-Mill spindle is another alternative.
Little Machine shop sells the unit for $250.00, but Homier sells the
whole mill for $299.00
http://www.littlemachineshop.com/products/product_view.php?
ProductID=1663
Motor, DC speed control, R8 spindle. This is a serious miniature
milling head.
I think Homier sells the replacement head for less, if you can get
thru to them.
There are pages on the web from people who trashed the junky column
feed and replaced it with a ballscrew.
this offers some promise for the heavy duty side of light milling or
the light side of metal milling.
Dave
<george_barr@y...> wrote:
> How much is a sherline spindle? What is the difference with athe
> spindle, motor, and headstock? Sherline mills are very small and
> mill I plan to build is about 4' x 4'.Wow, youse guyse needs to trim your posts.
>
> Thanks,
A Mini-Mill spindle is another alternative.
Little Machine shop sells the unit for $250.00, but Homier sells the
whole mill for $299.00
http://www.littlemachineshop.com/products/product_view.php?
ProductID=1663
Motor, DC speed control, R8 spindle. This is a serious miniature
milling head.
I think Homier sells the replacement head for less, if you can get
thru to them.
There are pages on the web from people who trashed the junky column
feed and replaced it with a ballscrew.
this offers some promise for the heavy duty side of light milling or
the light side of metal milling.
Dave
Discussion Thread
george_barr
2004-04-13 11:33:58 UTC
VFD Selection
george_barr
2004-04-13 11:37:05 UTC
Re: VFD Selection
Leslie M. Watts
2004-04-13 11:47:14 UTC
RE: [CAD_CAM_EDM_DRO] VFD Selection
george_barr
2004-04-13 12:17:57 UTC
Re: VFD Selection
Leslie M. Watts
2004-04-13 13:03:30 UTC
RE: [CAD_CAM_EDM_DRO] Re: VFD Selection
george_barr
2004-04-13 13:29:41 UTC
Re: VFD Selection
Leslie M. Watts
2004-04-13 14:24:57 UTC
RE: [CAD_CAM_EDM_DRO] Re: VFD Selection
Drew Rogge
2004-04-13 14:32:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD Selection
Leslie M. Watts
2004-04-13 15:10:46 UTC
RE: [CAD_CAM_EDM_DRO] Re: VFD Selection
george_barr
2004-04-13 15:38:39 UTC
Re: VFD Selection
Leslie M. Watts
2004-04-13 16:56:41 UTC
RE: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
ballendo
2004-04-13 17:16:59 UTC
Re: VFD Selection
David A. Frantz
2004-04-13 17:43:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD Selection
Rick Chownyk
2004-04-13 19:43:13 UTC
Re: VFD Selection
george_barr
2004-04-13 20:50:15 UTC
Re: VFD Selection
turbulatordude
2004-04-13 21:37:15 UTC
Re: VFD Selection- alternate spindles
Vince Negrete
2004-04-13 23:02:14 UTC
RE: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
Jon Elson
2004-04-13 23:14:13 UTC
Re: [CAD_CAM_EDM_DRO] VFD Selection
Jon Elson
2004-04-13 23:23:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD Selection
Jon Elson
2004-04-13 23:27:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD Selection
Bill Vance
2004-04-14 00:18:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD Selection
Greg Nuspel
2004-04-14 03:24:16 UTC
Re: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
Nick Ibbitson
2004-04-14 03:25:32 UTC
Re: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
Nick Ibbitson
2004-04-14 03:30:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD Selection- alternate spindles
Greg Nuspel
2004-04-14 03:34:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD Selection- alternate spindles
Vince Negrete
2004-04-14 03:42:25 UTC
Re: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
Leslie M. Watts
2004-04-14 06:26:02 UTC
RE: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
james_cullins@s...
2004-04-14 06:32:02 UTC
Re: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
Vince Negrete
2004-04-14 07:51:25 UTC
Re: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
Leslie M. Watts
2004-04-14 10:05:43 UTC
RE: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
Henrik Olsson
2004-04-14 11:54:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD Selection
TODD BOMBACI
2004-04-14 13:50:53 UTC
Re: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
Greg Nuspel
2004-04-14 15:55:36 UTC
Re: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
Robert Benchic
2004-04-14 16:51:15 UTC
RE: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
Leslie M. Watts
2004-04-14 17:08:44 UTC
RE: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
David A. Frantz
2004-04-15 04:35:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: VFD Selection
David A. Frantz
2004-04-15 05:04:58 UTC
Re: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
Leslie M. Watts
2004-04-15 07:04:29 UTC
RE: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
Marcus and Eva
2004-04-15 08:16:06 UTC
Re: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
Leslie M. Watts
2004-04-15 09:05:57 UTC
RE: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
ballendo
2004-04-16 07:29:25 UTC
Re: VFD Selection- alternate spindles
ballendo
2004-04-16 07:30:15 UTC
Re: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
Leslie M. Watts
2004-04-16 09:08:31 UTC
RE: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
Greg Nuspel
2004-04-16 15:22:04 UTC
Re: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
ballendo
2004-04-19 12:43:49 UTC
Re: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
Leslie M. Watts
2004-04-19 16:10:43 UTC
RE: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
ballendo
2004-04-19 20:08:41 UTC
Re: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
Leslie M. Watts
2004-04-20 05:50:11 UTC
RE: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)
ballendo
2004-04-21 09:53:12 UTC
Re: [CAD_CAM_EDM_DRO]spindle plans (was VFD Selection)