Re: Measuring accuracy

I was not fully aware of this either! I had assumed ball=bull nose
bits.

just so i know I have it correct now-
"bull"= radiused corners
"ball"= bull nose with a radius matching that of the bit (thus a
full "ball").
what is the proper name for bits that have a literal BALL on the end
which is larger than the shank of the bit?? typically seen on dremel
tools.


--- In CAD_CAM_EDM_DRO@yahoogroups.com, Andy Wander <awander@v...>
wrote:

> Well, how about that?
>
> Every time I get too "big for my britches", I seem to learn

something new.

>
> Except, usually, some guy just punches me in the nose. Thanks for

being so

> civil about it.
>
>
> Andy Wander
> Verrex Corporation
>
>
> -----Original Message-----
> From: Gregory Kamysz [mailto:smsupply@a...]
> Sent: Thursday, June 24, 2004 10:56 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] Re: Measuring accuracy
>
> There are bull nose and there are ball nose. Bull nose might be

called

> plain with a corner radius. Plenty of ball nose endmills around,

bull

> nose are harder to find.
>
> Greg
>
>
>
>
> Andy Wander wrote:
> > They list them as "ball nose".
> >
> > Must be English slang... :)
> >
> > Andy Wander
> > Verrex Corporation
> >
> >
> > -----Original Message-----
> > From: Gregory Kamysz [mailto:smsupply@a...]
> > Sent: Thursday, June 24, 2004 9:47 PM
> > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subject: Re: [CAD_CAM_EDM_DRO] Re: Measuring accuracy
> >
> > Do you have a link for bull nose endmills at American Carbide?
> > I couldn't find them.
> >
> > Thanks.
> >
> > Greg
> >
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@a...,
> timg@k...
> Moderator: pentam@c... indigo_red@q... davemucha@j...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to

reach it if

> you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to

be a

> sister site to the CCED group, as many of the same members are

there, for OT

> subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING

THEM.

> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links