Re: [CAD_CAM_EDM_DRO] Re: Measuring accuracy
Posted by
Marcus and Eva
on 2004-06-27 12:47:11 UTC
> what is the proper name for bits that have a literal BALL on the endHi Earl:
> which is larger than the shank of the bit?? typically seen on dremel
> tools.
The technical and scientific name for these is "lollipop cutter".
Cheers
Marcus
Discussion Thread
Fred Smith
2004-06-10 23:09:09 UTC
DeskCNC update announcement
Gregory Kamysz
2004-06-11 17:31:34 UTC
Measuring accuracy
doug98105
2004-06-11 21:23:55 UTC
Re: Measuring accuracy
Jon Elson
2004-06-12 00:04:46 UTC
Re: [CAD_CAM_EDM_DRO] Measuring accuracy
David A. Frantz
2004-06-12 00:18:38 UTC
Re: [CAD_CAM_EDM_DRO] Measuring accuracy
Jon Elson
2004-06-12 19:48:40 UTC
Re: [CAD_CAM_EDM_DRO] Measuring accuracy
Gregory Kamysz
2004-06-13 20:18:34 UTC
Re: [CAD_CAM_EDM_DRO] Measuring accuracy
doug98105
2004-06-13 20:41:43 UTC
Re: Measuring accuracy
Gregory Kamysz
2004-06-13 21:16:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Measuring accuracy
Jon Elson
2004-06-13 22:45:40 UTC
Re: [CAD_CAM_EDM_DRO] Measuring accuracy
Jon Elson
2004-06-13 22:53:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Measuring accuracy
doug98105
2004-06-13 23:13:01 UTC
Re: Measuring accuracy
Les Newell
2004-06-14 01:08:09 UTC
Re: [CAD_CAM_EDM_DRO] Measuring accuracy
Fred Smith
2004-06-14 09:28:29 UTC
Re: Measuring accuracy
Gregory Kamysz
2004-06-16 21:38:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: Measuring accuracy
Fred Smith
2004-06-17 06:40:09 UTC
Re: Measuring accuracy
Fred Smith
2004-06-18 13:51:57 UTC
DeskCNC surfacing efficiency was Re: Measuring accuracy
Gregory Kamysz
2004-06-19 21:20:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Measuring accuracy
Fred Smith
2004-06-20 06:45:08 UTC
Re: Measuring accuracy
Earl
2004-06-23 14:30:29 UTC
Re: Measuring accuracy
metlmunchr
2004-06-23 15:51:52 UTC
Re: Measuring accuracy
Gregory Kamysz
2004-06-24 18:51:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Measuring accuracy
Andy Wander
2004-06-24 18:56:25 UTC
RE: [CAD_CAM_EDM_DRO] Re: Measuring accuracy
Gregory Kamysz
2004-06-24 19:50:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: Measuring accuracy
Andy Wander
2004-06-24 20:02:02 UTC
RE: [CAD_CAM_EDM_DRO] Re: Measuring accuracy
JanRwl@A...
2004-06-25 14:37:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Measuring accuracy
Earl
2004-06-27 12:02:51 UTC
Re: Measuring accuracy
Marcus and Eva
2004-06-27 12:47:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Measuring accuracy