CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Magnetic rotay encoders.

Posted by Dan Mauch
on 2004-08-07 05:23:11 UTC
In my research on the magnetic encoders it does mention that they are very
tolerant to contaminates and fluids. I guess the biggest worry is shorting
out the little circuit board for the sensor. The gap between the sensor and
the magnetic wheel is only .004" But I am impressed. I'll have to look to
see if they have these in a linear magnetic encoder.

Dan
----- Original Message -----
From: "Jon Elson" <elson@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, August 06, 2004 9:59 PM
Subject: Re: [CAD_CAM_EDM_DRO] Magnetic rotay encoders.


> Dan Mauch wrote:
>
> >Yesterday I received a servo motor with encoder to evaluate. The first
thing
> >I did was to remove the encoder cover. I was surprised to see that it was
a
> >magnetic encoder. I am not familiar with them so I did a search on Google
> >and found a few reference documents that confirmed my suspicion that they
> >were a TTL encoder and the wiring was similar to that used on other
encoders
> >and was compatible with the G320/G340 and other servo amps.
> >I hooked it up to a test G320 and confirmed that it was a 500 CPR encoder
> >that in quadrature was 2000 PPR. It only drew 25 ma thus making it a good
> >candidate for a small servo driven cnc machine. I talked with Marriss
and
> >he indicated that the magnetic type were usually more expensive than the
> >optical type. Does anyone have any experience with these type encoders on
> >working machines?
> >
> >
> I'm just tinkering with a Yaskawa brushless motor that uses a magnetic
> encoder.
> it seems that the motor had gear oil leak into it, and nobody even
> noticed, as the
> encoder was still working just fine. Obviously, an optical encoder
> would not work
> too well when partially filled with oil!
>
> Jon
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

Discussion Thread

Dan Mauch 2004-08-06 11:28:43 UTC Magnetic rotay encoders. Jon Elson 2004-08-06 22:03:39 UTC Re: [CAD_CAM_EDM_DRO] Magnetic rotay encoders. Dan Mauch 2004-08-07 05:23:11 UTC Re: [CAD_CAM_EDM_DRO] Magnetic rotay encoders. Jon Elson 2004-08-07 15:21:43 UTC Re: [CAD_CAM_EDM_DRO] Magnetic rotay encoders. dandumit 2009-04-23 00:37:59 UTC Re: Magnetic encoders 556RECON 2009-04-23 07:04:28 UTC Looking for study or learning partner. Ed 2009-04-23 07:25:06 UTC Re: [CAD_CAM_EDM_DRO] Looking for study or learning partner. Wilbur Robinson 2009-04-23 08:55:32 UTC RE: [CAD_CAM_EDM_DRO] Looking for study or learning partner. Ed 2009-04-23 09:30:08 UTC Re: From Member: RE: [CAD_CAM_EDM_DRO] Looking for study or learning partner. whitey 2009-04-23 09:44:04 UTC Re: [CAD_CAM_EDM_DRO] Looking for study or learning partner. Jon Elson 2009-04-23 10:03:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Magnetic encoders JCullins 2009-04-23 15:48:22 UTC Re: From Member: Re: [CAD_CAM_EDM_DRO] Looking for study or learning partner. Roland Jollivet 2009-04-23 16:33:28 UTC Re: Magnetic encoders Dave Halliday 2009-04-23 22:34:39 UTC RE: [CAD_CAM_EDM_DRO] Looking for study or learning partner. Hal Rhoades 2009-04-24 13:06:03 UTC Re: Looking for study or learning partner. dandumit 2009-04-25 03:45:08 UTC Re: Magnetic encoders Charles Mulhern 2009-04-26 13:24:59 UTC Re: Magnetic encoders James Reed 2009-04-26 20:38:22 UTC RE: From Member: Re: Magnetic encoders Roland Jollivet 2009-04-27 18:43:52 UTC Re: From Member: Re: Magnetic encoders dandumit 2009-04-29 09:33:15 UTC From Member: Re: Magnetic encoders Roland Jollivet 2009-04-29 11:05:21 UTC Re: Magnetic encoders