Dos v3.3 video resolution
Posted by
Shawncd
on 2004-09-01 21:00:29 UTC
Anyone here know how I can change my video resolution from 640x480 to
800x600? I have a Trident TVGA9000 ISA video card and I'm running MS-DOS
3.3. I recently had my monitor fail, I'm now trying to use a 12" LCD. I can
only see about half the normal screen. I hooked it up to my shop computer
and it does the same thing at the lower resolution.
Any help would be appreciated!!
Shawn
800x600? I have a Trident TVGA9000 ISA video card and I'm running MS-DOS
3.3. I recently had my monitor fail, I'm now trying to use a 12" LCD. I can
only see about half the normal screen. I hooked it up to my shop computer
and it does the same thing at the lower resolution.
Any help would be appreciated!!
Shawn
Discussion Thread
Shawncd
2004-09-01 21:00:29 UTC
Dos v3.3 video resolution
Jon Elson
2004-09-01 21:56:51 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
Shawncd
2004-09-01 22:18:50 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
Jon Elson
2004-09-02 10:32:03 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
shawncd@p...
2004-09-02 11:26:54 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
Stephen Wille Padnos
2004-09-02 11:28:55 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
Alan Marconett
2004-09-02 11:49:29 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
Tom Hubin
2004-09-02 11:52:29 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
shawncd@p...
2004-09-02 11:53:09 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
shawncd@p...
2004-09-02 11:56:13 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
John Rose
2004-09-02 17:14:05 UTC
RE: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
Stephen Wille Padnos
2004-09-02 17:20:39 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
Harvey White
2004-09-02 17:50:47 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution