RE: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution

Sorry I am joining this thread late on but as I remember there is a
utility for Trident chip sets too switch Vesa modes and somewhere I have
copy of it but I am not sure where, however more important the use of
Vesa modes is dependant on the application supporting them, so it might
be worth checking this.

By the sounds of things if your LCD supports 15KHz Horizontal then it is
designed for CGA and would therefore only support 640x480 res, so you
may have to consider a different monitor.

Hope this helps

John

-----Original Message-----
From: shawncd@... [mailto:shawncd@...]
Sent: 02 September 2004 20:56
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution

I tried that to.
Thanks
Tom

--- Original Message ---
From: Tom Hubin <thubin@...>
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Dos v3.3 video
resolution

>Hello,
>
>Maybe the BIOS can be used to setup the video mode.
>
>Tom Hubin
>thubin@...
>
>*************************
>
>Jon Elson wrote:
>>
>> Shawncd wrote:
>>
>> >Hi Jon,
>> >I purchased a Milltronics cnc lathe recently with

a bad monitor. I thought I

>> >would simply replace it with a 12" lcd I had

laying around, it fit perfectly

>> >in the original hole. The problem is with the

current resolution. I only

>> >have about 6" of viewing area in the middle of the

screen. I can see the

>> >everything fine, it's just very small. I would

like to utilize the rest of

>> >the screen. The Trident card is capable of 800x600

resolution (according to

>> >the web). I just don't know enough about MS-Dos to

put two and two together

>> >to make it work. Or maybe it is an impossibility

for Dos and the Milltronics

>> >software to accomplish this.
>> >Any help is appreciated!
>> >
>> >
>> >
>> The problem may be your LCD monitor may not be able

to handle this video

>> mode.
>> You may be able to reprogram it through a manual

setup mode, with the

>> control
>> buttons, instead of letting it auto-setup the

screen.

>>
>> Jon
>>
>> Addresses:
>> FAQ: http://www.ktmarketing.com/faq.html
>> FILES:

http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

>> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>>
>> Subscribe: CAD_CAM_EDM_DRO-

subscribe@yahoogroups.com

>> Unsubscribe: CAD_CAM_EDM_DRO-

unsubscribe@yahoogroups.com

>> List owner: CAD_CAM_EDM_DRO-

owner@yahoogroups.com, wanliker@...,
timg@...

>> Moderator: pentam@... indigo_red@...

davemucha@... [Moderators]

>> URL to this group:

http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

>>
>> OFF Topic POSTS: General Machining
>> If you wish to post on unlimited OT subjects

goto: aol://5863:126/rec.crafts.metalworking or go
thru Google.com to reach it if you have trouble.

>> http://www.metalworking.com/news_servers.html
>>
>> http://groups.yahoo.com/group/jobshophomeshop I

consider this to be a sister site to the CCED group,
as many of the same members are there, for OT subjects,

>>
>> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC

DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT
ACCEPT THIS.....NO EXCEPTIONS........

>> bill
>> List Mom
>> List Owner
>>
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES:

http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-

subscribe@yahoogroups.com

>Unsubscribe: CAD_CAM_EDM_DRO-

unsubscribe@yahoogroups.com

>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,

wanliker@..., timg@...

>Moderator: pentam@... indigo_red@...

davemucha@... [Moderators]

>URL to this group:

http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto:

aol://5863:126/rec.crafts.metalworking or go thru
Google.com to reach it if you have trouble.

>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I

consider this to be a sister site to the CCED group,
as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC

DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT
ACCEPT THIS.....NO EXCEPTIONS........

>bill
>List Mom
>List Owner
>
>
>Yahoo! Groups Links
>
>
>
>
>

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links