Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
Posted by
Jon Elson
on 2004-09-02 10:32:03 UTC
Shawncd wrote:
mode.
You may be able to reprogram it through a manual setup mode, with the
control
buttons, instead of letting it auto-setup the screen.
Jon
>Hi Jon,The problem may be your LCD monitor may not be able to handle this video
>I purchased a Milltronics cnc lathe recently with a bad monitor. I thought I
>would simply replace it with a 12" lcd I had laying around, it fit perfectly
>in the original hole. The problem is with the current resolution. I only
>have about 6" of viewing area in the middle of the screen. I can see the
>everything fine, it's just very small. I would like to utilize the rest of
>the screen. The Trident card is capable of 800x600 resolution (according to
>the web). I just don't know enough about MS-Dos to put two and two together
>to make it work. Or maybe it is an impossibility for Dos and the Milltronics
>software to accomplish this.
>Any help is appreciated!
>
>
>
mode.
You may be able to reprogram it through a manual setup mode, with the
control
buttons, instead of letting it auto-setup the screen.
Jon
Discussion Thread
Shawncd
2004-09-01 21:00:29 UTC
Dos v3.3 video resolution
Jon Elson
2004-09-01 21:56:51 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
Shawncd
2004-09-01 22:18:50 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
Jon Elson
2004-09-02 10:32:03 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
shawncd@p...
2004-09-02 11:26:54 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
Stephen Wille Padnos
2004-09-02 11:28:55 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
Alan Marconett
2004-09-02 11:49:29 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
Tom Hubin
2004-09-02 11:52:29 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
shawncd@p...
2004-09-02 11:53:09 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
shawncd@p...
2004-09-02 11:56:13 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
John Rose
2004-09-02 17:14:05 UTC
RE: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
Stephen Wille Padnos
2004-09-02 17:20:39 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution
Harvey White
2004-09-02 17:50:47 UTC
Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution