Re: [CAD_CAM_EDM_DRO] Dos v3.3 video resolution

On Thu, 02 Sep 2004 20:20:55 -0400, you wrote:

>It's unlikely that an 800x600 LCD would only support 640x480 display
>modes that went out of style before LCD monitors were mass produced. :)

The driver software should, but if remapped, the letters will be
blocky and not anywhere as pretty as you'd like. The best resolution
for any LCD display is the native resolution. It has to do with the
extreme sharpness of the pixels on the LCD display VS. the blurry
pixels on the CRT display.

Harvey

>
>- Steve
>
>John Rose wrote:
>
>>[snip]
>>By the sounds of things if your LCD supports 15KHz Horizontal then it is
>>designed for CGA and would therefore only support 640x480 res, so you
>>may have to consider a different monitor.
>>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>Yahoo! Groups Links
>
>
>
>
>