Re: [CAD_CAM_EDM_DRO] Moglice ?

Well if this Moglice stuff is anything like Belzona's
comparative product, it's pretty neat. They make cast
in bushings for the rear dump box hinge pins on
huge earth moving trucks, what are they, 100 tons,
and they outlast steel.

Steve

----------
From: Ron Ginger <ginger@...>
To: CAD_CAM_EDM_DRO@egroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Moglice ?
Date: Tuesday, May 16, 2000 1:10 PM

Jon Anderson wrote:

>
> Ron,
>
> When you mention casting a lead screw for a jib borer, do you mean they
> actually cast the threads on the leadscrew itself, or cast a nut to the
> lead screw?

Yes, they were casting a NUT- the screw is an ordinary steel screw.

Thanks for the tip on the release agent. I was thinking about making a
test fixture that just has a nut run back and forth, just hitting a
limit switch at each end, and letting it run as a life test.

ron

------------------------------------------------------------------------
Phone bills too big? Don't worry, beMANY!
http://click.egroups.com/1/4113/3/_/423600/_/958507676/
------------------------------------------------------------------------

Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.

Addresses:
Post message: CAD_CAM_EDM_DRO@egroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
Moderator: jmelson@... [Moderator]
URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
FAQ: http://www.ktmarketing.com/faq.html
bill,
List Manager