CAD CAM EDM DRO - Yahoo Group Archive

RE:Need a vacuum system for acrylic sheets

Posted by Stephan Kotze
on 2005-01-12 07:11:54 UTC
> Message: 25
> Date: Wed, 12 Jan 2005 02:58:06 -0000
> From: "kdoney_63021" <kdoney_63021@...>
> Subject: Need a vacuum system for acrylic sheets
>
>
> I have tried small vacuum pumps, with no success. I have even tried a
> shop wet dry vac with no success. Has anyone used a venturi system
> for large sheet work? I am using bullet catches through MDF (actually
> melamine) with about an inch of vacuum space. Is there a better way.
> I would be interested in purchasing a system if I could find one that
> would work with Bob Campbell's gantry design (low to the ground).
>
>

I have just recently built a venturi system like this for a friend for doing
exactly the same thing.
Even though the venturi has an enormous evacuation rate, you still need a
vacuum reservoir, I our case we
simply use a old geyser (Water boiler) with a couple of ball valves and a
NRV. Unfortunately I do not know the pressures,
But it was enough to crush a 44Gal drum like a soda tin

Stephan
South Africa

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.6.10 - Release Date: 2005/01/10

Discussion Thread

kdoney_63021 2005-01-11 18:58:08 UTC Need a vacuum system for acrylic sheets Ron 2005-01-11 19:23:42 UTC Re: Need a vacuum system for acrylic sheets Robert Campbell 2005-01-11 19:48:18 UTC Re: [CAD_CAM_EDM_DRO] Need a vacuum system for acrylic sheets Bob Muse 2005-01-11 20:09:20 UTC Re: [CAD_CAM_EDM_DRO] Need a vacuum system for acrylic sheets turbulatordude 2005-01-11 20:33:29 UTC Re: Need a vacuum system for acrylic sheets kdoney_63021 2005-01-12 05:47:44 UTC Re: Need a vacuum system for acrylic sheets Bob Muse 2005-01-12 05:56:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Need a vacuum system for acrylic sheets Leslie Watts 2005-01-12 06:03:58 UTC RE: [CAD_CAM_EDM_DRO] Re: Need a vacuum system for acrylic sheets Stephan Kotze 2005-01-12 07:11:54 UTC RE:Need a vacuum system for acrylic sheets turbulatordude 2005-01-12 07:55:49 UTC Re: Need a vacuum system for acrylic sheets Robert Campbell 2005-01-12 12:18:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Need a vacuum system for acrylic sheets JanRwl@A... 2005-01-12 14:10:17 UTC Re: [CAD_CAM_EDM_DRO] RE:Need a vacuum system for acrylic sheets James Lewis 2005-01-14 21:19:17 UTC Re: [CAD_CAM_EDM_DRO] Re: Need a vacuum system for acrylic sheets