CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Re edm software

Posted by TomP
on 2005-01-12 08:20:54 UTC
Steve,
Thanks. More general than EDM, an external master could
go forwards and backwards, a trick often used on mills to test
interference in a suspected area. I've often seen operators
using a handwheel ( the master) to see if a gouge would occur.
thanks again, tomp


--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.6.10 - Release Date: 1/10/05

Discussion Thread

Mark 2005-01-10 19:22:54 UTC Re edm software TomP 2005-01-10 21:43:27 UTC Re: [CAD_CAM_EDM_DRO] Re edm software alflewerken 2005-01-11 12:47:34 UTC Re: Re edm software Stephen Wille Padnos 2005-01-11 13:42:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Re edm software TomP 2005-01-11 18:53:00 UTC Re: [CAD_CAM_EDM_DRO] Re: Re edm software Stephen Wille Padnos 2005-01-11 19:04:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Re edm software TomP 2005-01-12 08:20:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Re edm software Alan Marconett 2005-01-12 09:40:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Re edm software Raymond Heckert 2005-01-12 19:25:46 UTC Re: [CAD_CAM_EDM_DRO] Re edm software TomP 2005-01-13 07:46:04 UTC Re: [CAD_CAM_EDM_DRO] Re edm software TomP 2005-01-13 07:52:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Re edm software Marcus and Eva 2005-01-13 08:25:30 UTC Re: [CAD_CAM_EDM_DRO] Re: Re edm software Alan Marconett 2005-01-13 10:21:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Re edm software William Alford 2005-01-14 21:20:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Re edm software/ use hardware Marcus and Eva 2005-01-14 23:06:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Re edm software/ use hardware TomP 2005-01-15 17:22:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Re edm software/ use hardware