Re: [CAD_CAM_EDM_DRO] Formula

From what I've read. Continuous torque is approximately 1/3 to 1/5 of stall torque. Using 1/3 a servo with a stall torque of 30 lb-in would be 10 lb-in continuous. And then its 16 ounces to the pound. About 160 oz-in continuous.

Bruce Pigeon <bwpigeon@...> wrote:
Hi

Is there a formula to determine what the oz in of a motor is from the
continuous stall lb/ft or peak
stall lb/ft. Is there a web site I can go to go reference this material. I
know little about motors and
controls. Any help would be appreciated.

Bruce

[Non-text portions of this message have been removed]



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links










[Non-text portions of this message have been removed]