CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Formula

Posted by Bruce Pigeon
on 2005-02-16 14:33:31 UTC
Steve

Now I have learned 2 things today. What a plus. I know little about
electronics, but am leaning. So I
will just keep asking questions and hope no one gets upset with some of my
simple questions.

Thanks

Bruce

-------Original Message-------

From: CAD_CAM_EDM_DRO@yahoogroups.com
Date: 02/16/05 12:12:41
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Formula

Bruce Pigeon wrote:

>Andy
>
>So then would it be 6 lb/f, 6 x 16 x 12 =1153 oz/in; 30 lb/ft, 30 x 16
x
>12 = 5760 oz/in.
>
>Bruce
>
>
Well - no. :)

He's referring to the fact that a slash is the symbol for division, and
there is no division in a "pound foot" or an "ounce inch". It's
actually the opposite - multiplication. The common notation is to use a
dash (which is also a minus sign, but we have to ignore that). So, the
accepted units for torque are inch-pounds (or in-lb), foot-pounds
(ft-lb), ounce-inches (oz-in), etc.

There was a (fairly long) thread on this subject a month or so ago.
- Steve



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec
crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links







.

[Non-text portions of this message have been removed]

Discussion Thread

Bruce Pigeon 2005-02-16 08:29:09 UTC Formula Stephen Wille Padnos 2005-02-16 08:45:30 UTC Re: [CAD_CAM_EDM_DRO] Formula R Rogers 2005-02-16 08:51:48 UTC Re: [CAD_CAM_EDM_DRO] Formula Bruce Pigeon 2005-02-16 09:18:21 UTC Re: [CAD_CAM_EDM_DRO] Formula Stephen Wille Padnos 2005-02-16 09:26:04 UTC Re: [CAD_CAM_EDM_DRO] Formula Bruce Pigeon 2005-02-16 09:41:26 UTC Re: [CAD_CAM_EDM_DRO] Formula Bruce Pigeon 2005-02-16 09:50:51 UTC Re: [CAD_CAM_EDM_DRO] Formula Andy Wander 2005-02-16 09:51:23 UTC RE: [CAD_CAM_EDM_DRO] Formula Bruce Pigeon 2005-02-16 10:07:12 UTC Re: [CAD_CAM_EDM_DRO] Formula Bruce Pigeon 2005-02-16 10:07:19 UTC RE: [CAD_CAM_EDM_DRO] Formula Stephen Wille Padnos 2005-02-16 10:12:32 UTC Re: [CAD_CAM_EDM_DRO] Formula Andy Wander 2005-02-16 10:16:16 UTC RE: [CAD_CAM_EDM_DRO] Formula Jens Swales 2005-02-16 10:20:54 UTC Re: Formula/Calculating Tool Maxi Bertotto 2005-02-16 12:34:01 UTC .STL files - Question Robert Campbell 2005-02-16 12:48:29 UTC Re: [CAD_CAM_EDM_DRO] .STL files - Question Bruce Pigeon 2005-02-16 14:33:31 UTC Re: [CAD_CAM_EDM_DRO] Formula MateuszGoÿffffb3ÿffffb9bek 2005-02-26 09:36:05 UTC Re: [CAD_CAM_EDM_DRO] .STL files - Question