Re: [CAD_CAM_EDM_DRO] Formula

The motor is 30 lb/ft not 30 lb/in, so it should be x 12 if I understood
Steve's formula. That would be 1/3 of
30 = 10 x 12 x 16 = 1920 oz/in. Or 1/5 of 30 = 6 x 12 x 16 = 1152 oz/in..
The tag on the motor shows cont. stall at 6 lb/ft. So the latter is
probably right. I think.

That should be enough to run a 7' gantry with 2 cutting heads. Maybe I'll
build the machine larger, no then I would have to build an addition on the
building. My wife would kill me.

Thanks

Bruce

-------Original Message-------

From: CAD_CAM_EDM_DRO@yahoogroups.com
Date: 02/16/05 10:51:50
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Formula

From what I've read. Continuous torque is approximately 1/3 to 1/5 of stall
torque. Using 1/3 a servo with a stall torque of 30 lb-in would be 10 lb-in
continuous. And then its 16 ounces to the pound. About 160 oz-in continuous.

Bruce Pigeon <bwpigeon@...> wrote:
Hi

Is there a formula to determine what the oz in of a motor is from the
continuous stall lb/ft or peak
stall lb/ft. Is there a web site I can go to go reference this material. I
know little about motors and
controls. Any help would be appreciated.

Bruce

[Non-text portions of this message have been removed]



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts
metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON
T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links










[Non-text portions of this message have been removed]



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec
crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links







.

[Non-text portions of this message have been removed]