CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re:Lapping

on 2005-03-24 19:12:12 UTC
Hi Randy:
High precision parts like fuel injectors are often lapped, but they are
not lapped together.
The bores are lapped with a Sunnen hone, and the bodies are lapped with a
ringlap.
Then they are selectively assembled, ie; they are gauged and graded, then
the bodies are matched with the best fitting bores for them.
If you try to lap closely filtting mating parts, they'll most likely seize
together and never ever come apart again.
Cheers

Marcus

----- Original Message -----
From: "m0nkey0ne" <m0nkey0ne@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, March 24, 2005 9:13 AM
Subject: [CAD_CAM_EDM_DRO] Re:Lapping


>
>
> I believe hydraulic control valves and diesel fuel injectors are
> lapped with "parts in place" resulting in matched assemblies. The
> lapping compound is not the same as valve lapping compound, but the
> result is similar. There is a time and place for lapping. Is it
> usable here, or will I ruin my machine?
> Randy

Discussion Thread

Ron Ginger 2005-03-24 05:30:23 UTC Re:Lapping Tom Hubin 2005-03-24 06:06:59 UTC Re: [CAD_CAM_EDM_DRO] Re:Lapping Andy Wander 2005-03-24 07:26:19 UTC RE: [CAD_CAM_EDM_DRO] Re:Lapping Jeff Goldberg 2005-03-24 07:33:04 UTC RE: [CAD_CAM_EDM_DRO] Re:Lapping turbulatordude 2005-03-24 07:35:32 UTC Re:Lapping Marcus and Eva 2005-03-24 08:40:55 UTC Re: [CAD_CAM_EDM_DRO] Re:Lapping m0nkey0ne 2005-03-24 09:14:27 UTC Re:Lapping R Rogers 2005-03-24 11:12:13 UTC RE: [CAD_CAM_EDM_DRO] Re:Lapping Bruce Pigeon 2005-03-24 12:28:58 UTC RE: [CAD_CAM_EDM_DRO] Re:Lapping Roger Hampson 2005-03-24 12:34:28 UTC RE: [CAD_CAM_EDM_DRO] Re:Lapping Ted Gregorius 2005-03-24 12:42:16 UTC Re: RE: [CAD_CAM_EDM_DRO] Re:Lapping George Taylor, IV 2005-03-24 13:05:56 UTC Re: RE: [CAD_CAM_EDM_DRO] Re:Lapping R Rogers 2005-03-24 13:37:12 UTC RE: [CAD_CAM_EDM_DRO] Re:Lapping Andy Wander 2005-03-24 13:42:17 UTC RE: [CAD_CAM_EDM_DRO] Re:Lapping adriankole 2005-03-24 14:44:09 UTC Re:Lapping Bruce Pigeon 2005-03-24 14:52:19 UTC Re: RE: [CAD_CAM_EDM_DRO] Re:Lapping turbulatordude 2005-03-24 15:11:57 UTC Re:Lapping and scraping Jon Elson 2005-03-24 17:12:06 UTC Re: [CAD_CAM_EDM_DRO] Re:Lapping and scraping Jon Elson 2005-03-24 17:12:55 UTC Re: [CAD_CAM_EDM_DRO] Re:Lapping and scraping Marcus and Eva 2005-03-24 19:12:12 UTC Re: [CAD_CAM_EDM_DRO] Re:Lapping Ron Ginger 2005-03-25 11:46:35 UTC Re:Lapping and scraping Dave Shiels 2005-03-25 14:22:04 UTC Re: [CAD_CAM_EDM_DRO] Re:Lapping and scraping