RE: [CAD_CAM_EDM_DRO] Re:Lapping
Posted by
Jeff Goldberg
on 2005-03-24 07:33:04 UTC
I agree with Andy on this one. While you can use a lapping tool to smooth a
surface independently (if you have one smooth surface that you don't want to
wear and one "bumpy" on that you want to match). The whole theory to lapping
IS the wearing down (slightly) of the two parts so any microscopic
irregularities disappear and they become flat in relationship to each other.
Obviously, the worse the match, the more material you will have to remove
and adjust for dimensionally.
Jeff
-----Original Message-----
From: Andy Wander [mailto:awander@...]
Sent: Thursday, March 24, 2005 10:25 AM
To: 'CAD_CAM_EDM_DRO@yahoogroups.com'
Subject: RE: [CAD_CAM_EDM_DRO] Re:Lapping
If lapping can only be done with a lap, and using lapping compound on 2
mating surfaces to smooth them up NEVER makes things better, why do custom
gunsmiths working on tightening up the slide-to-frame fit on auto pistols
use this technique?
Ron, I think you're being a little TOO adamant on this point.
Andy Wander
Verrex Corporation
-----Original Message-----
From: Tom Hubin [mailto:thubin@...]
Sent: Thursday, March 24, 2005 9:07 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re:Lapping
Tom Hubin
thubin@...
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators] URL to this group:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators] URL to this group:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
surface independently (if you have one smooth surface that you don't want to
wear and one "bumpy" on that you want to match). The whole theory to lapping
IS the wearing down (slightly) of the two parts so any microscopic
irregularities disappear and they become flat in relationship to each other.
Obviously, the worse the match, the more material you will have to remove
and adjust for dimensionally.
Jeff
-----Original Message-----
From: Andy Wander [mailto:awander@...]
Sent: Thursday, March 24, 2005 10:25 AM
To: 'CAD_CAM_EDM_DRO@yahoogroups.com'
Subject: RE: [CAD_CAM_EDM_DRO] Re:Lapping
If lapping can only be done with a lap, and using lapping compound on 2
mating surfaces to smooth them up NEVER makes things better, why do custom
gunsmiths working on tightening up the slide-to-frame fit on auto pistols
use this technique?
Ron, I think you're being a little TOO adamant on this point.
Andy Wander
Verrex Corporation
-----Original Message-----
From: Tom Hubin [mailto:thubin@...]
Sent: Thursday, March 24, 2005 9:07 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re:Lapping
> In fact,And alternating two of three surfaces to grind all three flat.
> telescope makers make their mirrors by grinding two surfaces together
> to make them curved.
Tom Hubin
thubin@...
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators] URL to this group:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators] URL to this group:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
Discussion Thread
Ron Ginger
2005-03-24 05:30:23 UTC
Re:Lapping
Tom Hubin
2005-03-24 06:06:59 UTC
Re: [CAD_CAM_EDM_DRO] Re:Lapping
Andy Wander
2005-03-24 07:26:19 UTC
RE: [CAD_CAM_EDM_DRO] Re:Lapping
Jeff Goldberg
2005-03-24 07:33:04 UTC
RE: [CAD_CAM_EDM_DRO] Re:Lapping
turbulatordude
2005-03-24 07:35:32 UTC
Re:Lapping
Marcus and Eva
2005-03-24 08:40:55 UTC
Re: [CAD_CAM_EDM_DRO] Re:Lapping
m0nkey0ne
2005-03-24 09:14:27 UTC
Re:Lapping
R Rogers
2005-03-24 11:12:13 UTC
RE: [CAD_CAM_EDM_DRO] Re:Lapping
Bruce Pigeon
2005-03-24 12:28:58 UTC
RE: [CAD_CAM_EDM_DRO] Re:Lapping
Roger Hampson
2005-03-24 12:34:28 UTC
RE: [CAD_CAM_EDM_DRO] Re:Lapping
Ted Gregorius
2005-03-24 12:42:16 UTC
Re: RE: [CAD_CAM_EDM_DRO] Re:Lapping
George Taylor, IV
2005-03-24 13:05:56 UTC
Re: RE: [CAD_CAM_EDM_DRO] Re:Lapping
R Rogers
2005-03-24 13:37:12 UTC
RE: [CAD_CAM_EDM_DRO] Re:Lapping
Andy Wander
2005-03-24 13:42:17 UTC
RE: [CAD_CAM_EDM_DRO] Re:Lapping
adriankole
2005-03-24 14:44:09 UTC
Re:Lapping
Bruce Pigeon
2005-03-24 14:52:19 UTC
Re: RE: [CAD_CAM_EDM_DRO] Re:Lapping
turbulatordude
2005-03-24 15:11:57 UTC
Re:Lapping and scraping
Jon Elson
2005-03-24 17:12:06 UTC
Re: [CAD_CAM_EDM_DRO] Re:Lapping and scraping
Jon Elson
2005-03-24 17:12:55 UTC
Re: [CAD_CAM_EDM_DRO] Re:Lapping and scraping
Marcus and Eva
2005-03-24 19:12:12 UTC
Re: [CAD_CAM_EDM_DRO] Re:Lapping
Ron Ginger
2005-03-25 11:46:35 UTC
Re:Lapping and scraping
Dave Shiels
2005-03-25 14:22:04 UTC
Re: [CAD_CAM_EDM_DRO] Re:Lapping and scraping