RE: [CAD_CAM_EDM_DRO] Re:Lapping

If lapping can only be done with a lap, and using lapping compound on 2
mating surfaces to smooth them up NEVER makes things better, why do custom
gunsmiths working on tightening up the slide-to-frame fit on auto pistols
use this technique?

Ron, I think you're being a little TOO adamant on this point.

Andy Wander
Verrex Corporation

-----Original Message-----
From: Tom Hubin [mailto:thubin@...]
Sent: Thursday, March 24, 2005 9:07 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re:Lapping

> In fact,
> telescope makers make their mirrors by grinding two surfaces together to
> make them curved.

And alternating two of three surfaces to grind all three flat.

Tom Hubin
thubin@...



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links