Re: [CAD_CAM_EDM_DRO] 3 Phase rotary converters
Posted by
Beau Beaufait
on 2005-05-08 15:08:57 UTC
Assuming a 230 V system something less than that. I think one of the
standard ones is around 187 vac. BTW on a 10hp system I recommend you use
the potential relay to operate a contactor rated for your motor hp. I used
a 2 pole and ran it thru BOTH poles. If the relay/contater sticks it blows
up the starting caps in less than 5 sec. (ask me how I know).
Good luck, Beau
standard ones is around 187 vac. BTW on a 10hp system I recommend you use
the potential relay to operate a contactor rated for your motor hp. I used
a 2 pole and ran it thru BOTH poles. If the relay/contater sticks it blows
up the starting caps in less than 5 sec. (ask me how I know).
Good luck, Beau
----- Original Message -----
From: "David Speck" <Dave@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, May 08, 2005 11:14 AM
Subject: [CAD_CAM_EDM_DRO] 3 Phase rotary converters
> Anyone have experience designing 3 phase rotary converters?
>
> I'm building a 10 HP unit now, and have seen designs for self starting
> systems that use a voltage sensitive (potential) relay connected between
> the midpoint of the powered winding and the derived phase to disconnect
> the start capacitors when the converter motor reaches full speed.
>
> Can anyone suggest at what voltage the start relay should drop out?
> I've seen specific part number suggested, but no actual voltage ratings.
>
> Thanks in advance.
> Dave
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
Discussion Thread
Andrey Lipavsky
2005-05-08 05:31:48 UTC
Optical limit switches
Lance Hopper
2005-05-08 05:49:21 UTC
Re: Optical limit switches
turbulatordude
2005-05-08 06:02:32 UTC
Re: Optical limit switches
Andrey Lipavsky
2005-05-08 06:08:30 UTC
RE: [CAD_CAM_EDM_DRO] Re: Optical limit switches
David Speck
2005-05-08 07:24:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Optical limit switches
turbulatordude
2005-05-08 07:57:00 UTC
Re: Optical limit switches
David Speck
2005-05-08 09:28:31 UTC
3 Phase rotary converters
cnc_4_me
2005-05-08 09:57:47 UTC
Re: 3 Phase rotary converters
David Speck
2005-05-08 10:22:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3 Phase rotary converters
Beau Beaufait
2005-05-08 15:08:57 UTC
Re: [CAD_CAM_EDM_DRO] 3 Phase rotary converters
Beau Beaufait
2005-05-08 15:09:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3 Phase rotary converters
bobmcknight@c...
2005-05-08 16:45:30 UTC
Re: [CAD_CAM_EDM_DRO] 3 Phase rotary converters
cnc_4_me
2005-05-08 17:21:18 UTC
Re: 3 Phase rotary converters
JanRwl@A...
2005-05-08 21:10:24 UTC
Re: [CAD_CAM_EDM_DRO] 3 Phase rotary converters
cnc002@a...
2005-05-09 06:09:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3 Phase rotary converters
bobmcknight@c...
2005-05-09 19:38:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3 Phase rotary converters
Arturo E. Duncan
2005-05-09 19:39:45 UTC
Re: Optical limit switches
Rick
2005-05-09 21:46:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3 Phase rotary converters
turbulatordude
2005-05-09 22:15:09 UTC
Re: Optical limit switches
Beau Beaufait
2005-05-09 22:37:34 UTC
Re: [CAD_CAM_EDM_DRO] 3 Phase rotary converters
Doug M
2005-05-10 06:21:14 UTC
Re: 3 Phase rotary converters
Greg Jackson
2005-09-20 20:33:16 UTC
RE: [CAD_CAM_EDM_DRO] 3 Phase rotary converters
JanRwl@A...
2005-09-20 21:08:10 UTC
Re: [CAD_CAM_EDM_DRO] 3 Phase rotary converters