Re: [CAD_CAM_EDM_DRO] Re: 3 Phase rotary converters

If you go to Granger or Digi-Key the caps will be 440V
so you don't have to worry about the 220V or 350V
rating
Hardhat
--- cnc002@... wrote:

>
>
> In a message dated 5/8/2005 8:21:37 PM Eastern
> Daylight Time,
> cnc4me@... writes:
>
> I think that is a peak rating. Peak is 1.414 x
> 240vac = 340 volts
> peak. This gives a 30 volt safey factor. I used
> 240v because this
> is what the lines are supposed to be.
>
> Wally
>
>
>
> That is the peak rating, if you are going to be
> working with a 240 Vac
> voltage line then the capacitors should be rated
> around 350 Volts and
> NON-Polarized as you are dealing with AC current.
>
>
>
> Randy Abernathy
> 4626 Old Stilesboro Road NW
> Acworth, GA 30101-4066
> Phone / Fax: 770-974-5295
> E-mail: cnc002@...
>
> I furnish technical support, repair, and other
> related services for your
> industrial woodworking machinery. My background as
> Senior Service Engineer for
> the SCMI Group for nearly fifteen years with
> factory training, combines with
> my extensive background in electronics, mechanics,
> pneumatics, electrical and
> CNC machinery to offer you needed support for your
> machinery.
>
>
> [Non-text portions of this message have been
> removed]
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe:
> CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@...
> davemucha@... [Moderators]
> URL to this group:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru
> Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I
> consider this to be a sister site to the CCED group,
> as many of the same members are there, for OT
> subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
> DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT
> ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
>
>
>
>

__________________________________
Do you Yahoo!?
Yahoo! Mail - You care about security. So do we.
http://promotions.yahoo.com/new_mail