CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping

Posted by Roger Hampson
on 2005-06-16 11:55:24 UTC
Hi,

The problem you are all overlooking is that the aluminium extrusion is
oscillating by adding oil, water, and soggy teddy bears is not going to
remove the energy in the oscillation.
The best method is to put a 1/4 wavelength stub at the point of maximum
oscillation, something like a stiff spring a length of stiff wire and adjust
a weight that you can slide up and down the rod, at some point of both
length and weight the oscillation will stop!!

Now do not ask about the maths or length of rod.....you can tell me that!!

Regards

Roger (UK)

-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of bank haam
Sent: 16 June 2005 19:13
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping

Hi,

What about using motor oil ? Does the weight of the motor oil help in this
experiment ?

Just a thought.

Best wishes.

David Bloomfield <davidbloomfield@...> wrote:
This sounds very interesting, the best test would be to fill a tube up with
some of the balls, then strike it with something hard. If it doesn't ring
then you may have something. Please let us know what you find out!!

> I remember a project from an audio article i read quite a few years
ago where some guys made speaker boxes using concrete and polystyrene balls
such as those found in bean bags.
>
> It made the boxes almost dead reasonance wise.

> Rob






Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators] URL to this group:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links









---------------------------------
Discover Yahoo!
Find restaurants, movies, travel & more fun for the weekend. Check it out!

[Non-text portions of this message have been removed]



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators] URL to this group:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links

Discussion Thread

Jim Colley 2005-06-14 15:52:47 UTC Al Extrusion Vibration Damping Andrey Lipavsky 2005-06-14 16:01:13 UTC RE: [CAD_CAM_EDM_DRO] Al Extrusion Vibration Damping Codesuidae 2005-06-14 16:06:44 UTC Re: [CAD_CAM_EDM_DRO] Al Extrusion Vibration Damping jkbrennan 2005-06-14 16:29:24 UTC Re: [CAD_CAM_EDM_DRO] Al Extrusion Vibration Damping Ron Kline 2005-06-14 19:00:26 UTC Re: [CAD_CAM_EDM_DRO] Al Extrusion Vibration Damping jkbrennan 2005-06-14 19:19:15 UTC Re: [CAD_CAM_EDM_DRO] Al Extrusion Vibration Damping turbulatordude 2005-06-15 06:33:27 UTC Re: Al Extrusion Vibration Damping Luc Frigon 2005-06-15 14:29:53 UTC Re: [CAD_CAM_EDM_DRO] Al Extrusion Vibration Damping Luc Frigon 2005-06-15 14:30:39 UTC Re: [CAD_CAM_EDM_DRO] Al Extrusion Vibration Damping David Bloomfield 2005-06-15 18:58:17 UTC Re: Al Extrusion Vibration Damping Robb Greathouse 2005-06-15 21:15:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping Rob Sarten 2005-06-16 07:52:11 UTC Re: Al Extrusion Vibration Damping David Bloomfield 2005-06-16 08:01:41 UTC Re: Al Extrusion Vibration Damping David Bloomfield 2005-06-16 08:03:54 UTC Re: Al Extrusion Vibration Damping jkbrennan 2005-06-16 09:14:08 UTC [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping yahoo@h... 2005-06-16 10:59:14 UTC RE: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping bank haam 2005-06-16 11:13:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping Roger Hampson 2005-06-16 11:55:24 UTC RE: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping Alex Holden 2005-06-16 12:03:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping Alex Holden 2005-06-16 12:09:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping lcdpublishing 2005-06-16 12:29:03 UTC Re: Al Extrusion Vibration Damping David Bloomfield 2005-06-16 12:32:19 UTC Re: Al Extrusion Vibration Damping Roger Hampson 2005-06-16 14:00:47 UTC RE: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping Dave Shiels 2005-06-16 14:07:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping turbulatordude 2005-06-16 14:16:06 UTC Re: Al Extrusion Vibration Damping Codesuidae 2005-06-16 15:34:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping Jim Colley 2005-06-16 17:05:24 UTC Re: Al Extrusion Vibration Damping KM6VV 2005-06-16 17:52:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping jymmm 2005-06-17 09:35:37 UTC Re: Al Extrusion Vibration Damping Rob Sarten 2005-06-17 13:48:49 UTC Re: Re: Al Extrusion Vibration Damping Jim Colley 2005-06-17 17:54:50 UTC Re: Al Extrusion Vibration Damping Jon Elson 2005-06-17 20:36:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: Al Extrusion Vibration Damping Tom Hubin 2005-06-17 22:45:07 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: Al Extrusion Vibration Damping Fred Howe 2005-07-08 21:16:10 UTC Re: Al Extrusion Vibration Damping r@s... 2005-07-09 06:21:07 UTC RE: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping