Re: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping
Posted by
Alex Holden
on 2005-06-16 12:03:18 UTC
On 16 Jun 2005, at 17:00, <yahoo@...> <yahoo@...> wrote:
monoxide). It won't spontaneously split into gaseous hydrogen and
oxygen. Tapwater does contain some dissolved oxygen but you can get
rid of most of it by boiling it for a few minutes before filling the
tank, then making sure it is filled right to the top and sealed
airtight. You will probably still get a little rust but it will stop
once all the dissolved oxygen in the water has bound to iron.
--
------------ Alex Holden - http://www.alexholden.net/ ------------
If it doesn't work, you're not hitting it with a big enough hammer
> Not being a smartass here but; What's the second element in H2O.The oxygen in pure water is in the form of a stable oxide (dihydrogen
monoxide). It won't spontaneously split into gaseous hydrogen and
oxygen. Tapwater does contain some dissolved oxygen but you can get
rid of most of it by boiling it for a few minutes before filling the
tank, then making sure it is filled right to the top and sealed
airtight. You will probably still get a little rust but it will stop
once all the dissolved oxygen in the water has bound to iron.
--
------------ Alex Holden - http://www.alexholden.net/ ------------
If it doesn't work, you're not hitting it with a big enough hammer
Discussion Thread
Jim Colley
2005-06-14 15:52:47 UTC
Al Extrusion Vibration Damping
Andrey Lipavsky
2005-06-14 16:01:13 UTC
RE: [CAD_CAM_EDM_DRO] Al Extrusion Vibration Damping
Codesuidae
2005-06-14 16:06:44 UTC
Re: [CAD_CAM_EDM_DRO] Al Extrusion Vibration Damping
jkbrennan
2005-06-14 16:29:24 UTC
Re: [CAD_CAM_EDM_DRO] Al Extrusion Vibration Damping
Ron Kline
2005-06-14 19:00:26 UTC
Re: [CAD_CAM_EDM_DRO] Al Extrusion Vibration Damping
jkbrennan
2005-06-14 19:19:15 UTC
Re: [CAD_CAM_EDM_DRO] Al Extrusion Vibration Damping
turbulatordude
2005-06-15 06:33:27 UTC
Re: Al Extrusion Vibration Damping
Luc Frigon
2005-06-15 14:29:53 UTC
Re: [CAD_CAM_EDM_DRO] Al Extrusion Vibration Damping
Luc Frigon
2005-06-15 14:30:39 UTC
Re: [CAD_CAM_EDM_DRO] Al Extrusion Vibration Damping
David Bloomfield
2005-06-15 18:58:17 UTC
Re: Al Extrusion Vibration Damping
Robb Greathouse
2005-06-15 21:15:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping
Rob Sarten
2005-06-16 07:52:11 UTC
Re: Al Extrusion Vibration Damping
David Bloomfield
2005-06-16 08:01:41 UTC
Re: Al Extrusion Vibration Damping
David Bloomfield
2005-06-16 08:03:54 UTC
Re: Al Extrusion Vibration Damping
jkbrennan
2005-06-16 09:14:08 UTC
[CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping
yahoo@h...
2005-06-16 10:59:14 UTC
RE: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping
bank haam
2005-06-16 11:13:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping
Roger Hampson
2005-06-16 11:55:24 UTC
RE: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping
Alex Holden
2005-06-16 12:03:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping
Alex Holden
2005-06-16 12:09:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping
lcdpublishing
2005-06-16 12:29:03 UTC
Re: Al Extrusion Vibration Damping
David Bloomfield
2005-06-16 12:32:19 UTC
Re: Al Extrusion Vibration Damping
Roger Hampson
2005-06-16 14:00:47 UTC
RE: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping
Dave Shiels
2005-06-16 14:07:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping
turbulatordude
2005-06-16 14:16:06 UTC
Re: Al Extrusion Vibration Damping
Codesuidae
2005-06-16 15:34:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping
Jim Colley
2005-06-16 17:05:24 UTC
Re: Al Extrusion Vibration Damping
KM6VV
2005-06-16 17:52:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping
jymmm
2005-06-17 09:35:37 UTC
Re: Al Extrusion Vibration Damping
Rob Sarten
2005-06-17 13:48:49 UTC
Re: Re: Al Extrusion Vibration Damping
Jim Colley
2005-06-17 17:54:50 UTC
Re: Al Extrusion Vibration Damping
Jon Elson
2005-06-17 20:36:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Al Extrusion Vibration Damping
Tom Hubin
2005-06-17 22:45:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Al Extrusion Vibration Damping
Fred Howe
2005-07-08 21:16:10 UTC
Re: Al Extrusion Vibration Damping
r@s...
2005-07-09 06:21:07 UTC
RE: [CAD_CAM_EDM_DRO] Re: Al Extrusion Vibration Damping