CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] CNC Sharline

Posted by Peter Smith
on 2000-06-25 09:47:25 UTC
Hello Darrel

I have got a Phillips ESP60 digital camera, and it eats batteries as well, I
get about 18 shots from a new set, and thats about it, the batteries are not
flat but the camera will not work at less than 5.7 volts,
I measured the voltage on the mains adapter which was 6.5 volts, I then got
a sealed lead acid 6v battery, which lasts for about 4 months between
charging,

Best Wishes
Peter Smith
----- Original Message -----
From: Darrell <dgehlsen@...>
To: <CAD_CAM_EDM_DRO@egroups.com>
Sent: 24 June 2000 05:59
Subject: Re: [CAD_CAM_EDM_DRO] CNC Sharline


> Rich,
> I just sent a Nikon Cool Pix 800 back because it ate batteries like a
> starving elephant eating peanuts. It took great pictures but usually not
the
> one that I was trying to take. After pushing the shutter button it would
be
> 3 to 7 seconds before the shutter clicked. And yes there was plenty of
> light.
> Does your Nikon have any of these problems? Or did I just get a bad one?
> Darrell
>
> ----- Original Message -----
> From: Rich D. <cmsteam@...>
> To: <CAD_CAM_EDM_DRO@egroups.com>
> Sent: Friday, June 23, 2000 3:09 PM
> Subject: Re: [CAD_CAM_EDM_DRO] CNC Sharline
>
>
> > Alan, I use a Nikon CP950 camera. A well kept secret, it seems. Really
> > costs less than most 'snap shot' digitals, but pro quality and features.
> > Rich D.
> >
> >
>
>
> ------------------------------------------------------------------------
> Sign up for the free zZounds.com newsletter for the latest and
> greatest music gear savings, musician tips and hot contests.
> http://click.egroups.com/1/3738/4/_/423600/_/961822374/
> ------------------------------------------------------------------------
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
>

Discussion Thread

Jon Anderson 2000-06-21 17:36:51 UTC Re: [CAD_CAM_EDM_DRO] CNC Sharline Alan Marconett KM6VV 2000-06-21 19:15:31 UTC Re: [CAD_CAM_EDM_DRO] CNC Sharline wanliker@a... 2000-06-21 19:47:12 UTC Re: [CAD_CAM_EDM_DRO] CNC Sharline Rich D. 2000-06-21 19:55:50 UTC Re: [CAD_CAM_EDM_DRO] CNC Sharline Alan Marconett KM6VV 2000-06-23 12:34:06 UTC Re: [CAD_CAM_EDM_DRO] CNC Sharline wanliker@a... 2000-06-23 12:39:22 UTC Re: [CAD_CAM_EDM_DRO] CNC Sharline Rich D. 2000-06-23 15:09:43 UTC Re: [CAD_CAM_EDM_DRO] CNC Sharline Alan Marconett KM6VV 2000-06-23 15:33:38 UTC Re: [CAD_CAM_EDM_DRO] CNC Sharline Darrell 2000-06-23 21:52:54 UTC Re: [CAD_CAM_EDM_DRO] CNC Sharline Peter Smith 2000-06-25 09:47:25 UTC Re: [CAD_CAM_EDM_DRO] CNC Sharline Spehro Pefhany 2000-06-25 10:03:21 UTC Re: [CAD_CAM_EDM_DRO] CNC Sharline Jon Elson 2000-06-25 22:37:08 UTC Re: [CAD_CAM_EDM_DRO] CNC Sharline