RE: [CAD_CAM_EDM_DRO] Manual Control
Posted by
James Peck
on 2005-12-19 05:04:20 UTC
I can give you a schematic for wiring a remote Handwheel to an encdac
card used with OpenCNC.
-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of roboticscnc
Sent: Friday, December 16, 2005 7:49 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Manual Control
Hi guys. My lathe retrofit is almost complete but I would like the
option of manually controlling the servos using an input from encoders
mounted on handwheels. Does anyone have wiring information to set up
this function ? Thanks, Glen.
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be
a sister site to the CCED group, as many of the same members are
there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
[Non-text portions of this message have been removed]
card used with OpenCNC.
-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of roboticscnc
Sent: Friday, December 16, 2005 7:49 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Manual Control
Hi guys. My lathe retrofit is almost complete but I would like the
option of manually controlling the servos using an input from encoders
mounted on handwheels. Does anyone have wiring information to set up
this function ? Thanks, Glen.
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be
a sister site to the CCED group, as many of the same members are
there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
[Non-text portions of this message have been removed]
Discussion Thread
roboticscnc
2005-04-13 07:25:12 UTC
Manual Control
Mike
2005-04-13 08:11:26 UTC
Re: Manual Control
roboticscnc
2005-12-16 04:50:36 UTC
Manual Control
roboticscnc
2005-12-18 00:37:12 UTC
Manual Control
alphawolf45
2005-12-18 05:25:58 UTC
Re: Manual Control
R Rogers
2005-12-18 07:06:24 UTC
Re: [CAD_CAM_EDM_DRO] Manual Control
James Peck
2005-12-19 05:04:20 UTC
RE: [CAD_CAM_EDM_DRO] Manual Control
roboticscnc
2005-12-19 07:05:29 UTC
Re: Manual Control
Stephen Wille Padnos
2005-12-19 07:22:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Manual Control
Derek Brodeur
2005-12-19 07:22:32 UTC
Re: Manual Control
roboticscnc
2005-12-19 07:41:44 UTC
Re: Manual Control
vrsculptor
2005-12-19 08:32:08 UTC
Re: Manual Control
Derek Brodeur
2005-12-19 08:42:03 UTC
Re: Manual Control
Alan Marconett
2005-12-19 12:28:06 UTC
RE: [CAD_CAM_EDM_DRO] Re: Manual Control
vrsculptor
2005-12-19 16:09:45 UTC
Re: Manual Control
roboticscnc
2005-12-27 00:17:13 UTC
Re: Manual Control
Les Newell
2005-12-27 00:35:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Manual Control
roboticscnc
2005-12-27 00:50:13 UTC
Re: Manual Control
Steve Haushahn
2005-12-27 04:39:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Manual Control
Dan Mauch
2005-12-27 08:31:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: Manual Control
Les Newell
2005-12-28 05:13:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Manual Control
roboticscnc
2005-12-28 06:56:35 UTC
Re: Manual Control
Les Newell
2005-12-28 07:26:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Manual Control