Re: [CAD_CAM_EDM_DRO] Re: Manual Control

Sounds like a bug in the drive. Have you tried contacting CNCTeknix?

Les

roboticscnc wrote:

>Yes, the motor stops if the step wire is disconnected, however in this
>condition the disconnected step wire picks up the occasional pulse
>from the other axis' encoder and slowly moves the servo. This doesn't
>happen when the step wire is reconnected, as it is tied either high or
>low.
>I'm using a deskcnc driver and a tek10 driver. The deskcnc one works
>perfectly but the tek10 may have different requirements for the
>step/direction inputs.It may be trying to oscillate backwards &
>forwards with the quadrature inputs. Apart from this the tek10 works
>perfectly when controlled from the computer. ( as it was designed to ).
>
>