CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Stereolithograpy revisited

Posted by juan gelt
on 2006-03-27 12:13:48 UTC
wouldn't be hard to do it with turbocnc for software
(free) cuz it will handle 8 axes. The software part
should be no prob.
well, this tube was so well packed ups hardly had a
prayer of breaking it. pity it must sit in the box for
a while...i'm dying to fry the ants on the other side
of the street from here...lol.
welp, now to hunt up some decent znse lenses and
windows! then some intercooler or something...
looks good for vertical mounting. is that coil of
glass just to make the water swirl in there?
anyway, tube and psu is only part of the recipe...

--- skykotech <rick@...> wrote:

> > If some were serious about building one I would be
> interested. I
> > can't code "C", know enough about electronics not
> to let the magic
> > smoke out or light myself up and am a machinist by
> trade. (Mainly
> > CNC but also tool and die work.)
> >
>
> The fused sand technique looks pretty doable. A CO2
> laser (much
> cheaper than an eximer or frequency tripled or
> quadrupled YAG) is used
> to fused polymer coated sand together into a mold,
> when then can be
> used in castings. I saw an article about this, but
> have not seen any
> examples yet.
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe:
> CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@...
> davemucha@... [Moderators]
> URL to this group:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru
> Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I
> consider this to be a sister site to the CCED group,
> as many of the same members are there, for OT
> subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
> DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT
> ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
>
>
>
>
>


__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

Discussion Thread

skullworks 2006-03-26 22:08:25 UTC Stereolithograpy revisited skykotech 2006-03-27 09:38:23 UTC Re: Stereolithograpy revisited juan gelt 2006-03-27 12:13:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Stereolithograpy revisited turyga1963 2006-03-31 18:45:06 UTC Re: Stereolithograpy revisited Graham Stabler 2006-04-01 04:10:05 UTC Re: Stereolithograpy revisited BRIAN FOLEY 2006-04-01 05:20:19 UTC Re: [CAD_CAM_EDM_DRO] Re: Stereolithograpy revisited Michael Noltkamper 2006-04-01 05:27:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Stereolithograpy revisited Dave Fisher 2006-04-01 05:35:38 UTC RE: [CAD_CAM_EDM_DRO] Re: Stereolithograpy revisited Graham Stabler 2006-04-01 06:21:07 UTC Re: Stereolithograpy revisited juan gelt 2006-04-01 12:12:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Stereolithograpy revisited Graham Stabler 2006-04-01 17:25:10 UTC Re: Stereolithograpy revisited wanliker@a... 2006-04-01 17:39:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Stereolithograpy revisited Jon Elson 2006-04-01 21:58:00 UTC Re: [CAD_CAM_EDM_DRO] Re: Stereolithograpy revisited Graham Stabler 2006-04-02 03:29:14 UTC Re: Stereolithograpy revisited skykotech 2006-04-02 08:39:32 UTC Re: Stereolithograpy revisited juan gelt 2006-04-02 16:40:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Stereolithograpy revisited skykotech 2006-04-02 18:31:21 UTC Re: Stereolithograpy revisited wthomas@g... 2006-04-02 21:31:29 UTC W.E.T.: [CAD_CAM_EDM_DRO] Re: Stereolithograpy revisited turyga1963 2006-04-03 01:42:37 UTC Re: Stereolithograpy revisited Graham Stabler 2006-04-03 03:58:53 UTC W.E.T.: [CAD_CAM_EDM_DRO] Re: Stereolithograpy revisited Graham Stabler 2006-04-03 03:58:56 UTC Re: Stereolithograpy revisited turyga1963 2006-04-04 00:26:31 UTC Re: Stereolithograpy revisited laserted007 2006-04-04 15:59:45 UTC Re: Stereolithograpy revisited vrsculptor 2006-04-05 10:09:52 UTC Re: Stereolithograpy revisited