CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Windows Question (flamebait)

Posted by Jeff Goldberg
on 2006-04-10 05:58:19 UTC
I agree 100% with Abby. I currently use a couple of LPT ports with my
MACH/Bridgeport setup, supplemented by a keyboard emulator for inputs. If I
did it over again, I would probably use a touch screen LCD monitor and
either a Modbus interface (ModIO) or (more likely) a PLC for the underlying
controls. There are many ways to skin a cat and the choice is able to be
made by the designer as far as what works best (or is more economical) in a
given situation.

Regards.
Jeff





>LOL! It's a foregone conclusion; I won't be using Mach. LPT port? Is this
the
>21st century?
>
>
>
I think this counts as flamebait. You should be a little bit more
careful when posting not very well thought-out messages like this, as it
will quickly devolve into a screaming match. Opinions allowed, but
outright mockery (especially with very little research to back it) is
never good.

You might also be surprised to find that many people on this list use
the parallel port for controlling their mills - it's actually quite a
good option because of it's low-cost and surprising reliablility. In
addition, Mach is one of the best machine controller packages (I know
of) on the market - a lot of people have very sucessfully refitted large
CNC machine to use mach as the controller as they find it preferable.
You can send G-codes down to a serial board, or drop in servo cards if
you want - but if the actual interface of the progam controlling this is
poor, you'll find the machine cumbersome and not very productive. In the
area of features and GUI, mach is excellent.

My 2c. Let's not turn this into a flame.

~Abby



>
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
>Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>




Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links

Discussion Thread

wanliker@a... 2006-04-07 10:30:43 UTC Windows Question Vlad Krupin 2006-04-07 14:46:24 UTC Re: [CAD_CAM_EDM_DRO] Windows Question Graham Stabler 2006-04-07 14:55:29 UTC Re: Windows Question wanliker@a... 2006-04-07 17:00:38 UTC Re: [CAD_CAM_EDM_DRO] Windows Question Jarrett & Heidi Johnson 2006-04-07 17:05:24 UTC Re: [CAD_CAM_EDM_DRO] Windows Question wanliker@a... 2006-04-07 19:41:08 UTC Re: [CAD_CAM_EDM_DRO] Windows Question Jarrett & Heidi Johnson 2006-04-07 20:11:23 UTC Re: [CAD_CAM_EDM_DRO] Windows Question Dave Halliday 2006-04-07 21:13:17 UTC RE: [CAD_CAM_EDM_DRO] Windows Question Dave Halliday 2006-04-07 21:14:04 UTC RE: [CAD_CAM_EDM_DRO] Windows Question wanliker@a... 2006-04-07 22:05:34 UTC Re: [CAD_CAM_EDM_DRO] Windows Question wanliker@a... 2006-04-07 22:07:48 UTC Re: [CAD_CAM_EDM_DRO] Windows Question Alan Marconett 2006-04-08 08:57:41 UTC Re: [CAD_CAM_EDM_DRO] Windows Question Dave Halliday 2006-04-08 14:28:56 UTC RE: [CAD_CAM_EDM_DRO] Windows Question Alan Marconett 2006-04-08 14:38:01 UTC Re: [CAD_CAM_EDM_DRO] Windows Question Dave Halliday 2006-04-08 14:55:50 UTC RE: [CAD_CAM_EDM_DRO] Windows Question Pete Brown (YahooGroups) 2006-04-08 18:48:07 UTC RE: [CAD_CAM_EDM_DRO] Windows Question Ron Kline 2006-04-08 20:25:53 UTC Re: [CAD_CAM_EDM_DRO] Windows Question Paul Kelly 2006-04-08 20:46:20 UTC VNH3SP30 Dave Halliday 2006-04-08 21:19:50 UTC RE: [CAD_CAM_EDM_DRO] Windows Question Steve Blackmore 2006-04-09 00:21:26 UTC Re: [CAD_CAM_EDM_DRO] Windows Question Ron Kline 2006-04-09 07:20:07 UTC Re: [CAD_CAM_EDM_DRO] Windows Question Keith Bowers 2006-04-09 17:11:58 UTC Re: [CAD_CAM_EDM_DRO] Windows Question Bob Muse 2006-04-09 18:23:26 UTC Re: [CAD_CAM_EDM_DRO] VNH3SP30 Les Newell 2006-04-10 00:20:08 UTC Re: [CAD_CAM_EDM_DRO] Windows Question Jack Hudler 2006-04-10 04:34:39 UTC RE: [CAD_CAM_EDM_DRO] Windows Question Abby Katt 2006-04-10 05:29:00 UTC Re: [CAD_CAM_EDM_DRO] Windows Question (flamebait) Jeff Goldberg 2006-04-10 05:58:19 UTC RE: [CAD_CAM_EDM_DRO] Windows Question (flamebait) Graham Stabler 2006-04-10 07:17:29 UTC Re: Windows Question (flamebait) caudlet 2006-04-10 07:26:41 UTC Re: Windows Question [moderator note] Jack Hudler 2006-04-10 10:16:29 UTC RE: [CAD_CAM_EDM_DRO] Re: Windows Question (flamebait)