Re: How to cut card board about 1mm thick using router table.

I like your suggestion very much, since I have not work with mach3
before, I want to buy some simple starter kit
with 2 motor, driver, power supply and mach 3 software
what is the good place to start something like this?
Thanks.

--- In CAD_CAM_EDM_DRO@yahoogroups.com, "vrsculptor" <vrsculptor@...>
wrote:

>
> No, I don't have a link but you can find some information in the manual
> <http://www.machsupport.com/documentation/M3M1_84-A1Rel.pdf>. I don't
> use this feature but I think Mach3 treats the knife as a separate axis
> much like a spindle. You would have to refit your machine as Mach3
> needs to drive all axis for this feature to work. Mach3 can drive up to
> 6 axis.
>
> > Do you have any link or pointer where I can find tangential life for
> > mach3 to drive it?
> > Thanks.
>