Re: [CAD_CAM_EDM_DRO] bridgeport boss servo

The motor itself should be ideal. Mechanically it should be pretty much
a drop in replacement. A Gecko drive will have problems with the 2000
count encoder. Apart from the speed issues Jon mentioned, Geckos tend to
have tuning problems with high resolution encoders. However a Rutex
drive, such as the R990H should be ideal <http://www.rutex.com>. Rutex
drives are designed for differential encoders and the on-board pulse
multiplier will sort out the speed issues.

Les

rocketscientistnate wrote:

> Will the servos on http://ajaxcnc.com/cnc_components.htm work well?
> If I understand right the 29 in-lb would be the right size. Maybe the
> 40s on the x and y when I get to them.
>
> Thanks
> Nathan
>
>