Re: [CAD_CAM_EDM_DRO] bridgeport boss servo

You also may want to look at the cnc teknix drives at www.cncteknix.com or
more specifically
http://cncteknix.com/portal/component/page,shop.product_details/flypage,shop.flypage/product_id,9/category_id,3/option,com_virtuemart/Itemid,67/
They take quadrature or differential encoders. A bit more sophisticated than
the Rutex in my opinion.
Dan Mauch
low cost stepper and servo motors.
cases for Gecko drives
kits and assembled 3-4 axis drives
www.camtronics-cnc.com
www.seanet.com/~dmauch

----- Original Message -----
From: "Les Newell" <lesnewell@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, September 07, 2006 1:41 AM
Subject: Re: [CAD_CAM_EDM_DRO] bridgeport boss servo


> The motor itself should be ideal. Mechanically it should be pretty much
> a drop in replacement. A Gecko drive will have problems with the 2000
> count encoder. Apart from the speed issues Jon mentioned, Geckos tend to
> have tuning problems with high resolution encoders. However a Rutex
> drive, such as the R990H should be ideal <http://www.rutex.com>. Rutex
> drives are designed for differential encoders and the on-board pulse
> multiplier will sort out the speed issues.
>
> Les
>
> rocketscientistnate wrote:
>> Will the servos on http://ajaxcnc.com/cnc_components.htm work well?
>> If I understand right the 29 in-lb would be the right size. Maybe the
>> 40s on the x and y when I get to them.
>>
>> Thanks
>> Nathan
>>
>>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>