Re: [CAD_CAM_EDM_DRO] Epoxy nut ?

Dave you should look into a product called Moglice. [Moglice.com] They have several different types but some are made for just this very process. I've not used it for this but I understand it works very well!

Jarrett Johnson

----- Original Message -----
From: turbulatordude <dave_mucha@...>
Date: Friday, September 8, 2006 9:54 am
Subject: [CAD_CAM_EDM_DRO] Epoxy nut ?

> Hi all,
>
> I have a garage door opener with a nice 8 foot multi-start screw.
>
> I want to make a nut for in and instead of trying to cut the screw to
> make it into a tap, I would like to make a form and fill in epoxy.
>
> Any suggestions what epoxy would wear well ?
>
> And any suggestions on a release agent ? I was thinking silicone
> spray, but not sure if that is the best.
>
> I figure I would be safe by casting this on one end were there is
> no wear.
>
> Dave
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@...
> davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to
> be a sister site to the CCED group, as many of the same members
> are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
> (Yahoo! ID required)
>
> CAD_CAM_EDM_DRO-fullfeatured@yahoogroups.com
>
>
>
>
>
>