CAD CAM EDM DRO - Yahoo Group Archive

Re: Epoxy nut ?

Posted by Ron Ginger
on 2006-09-09 06:00:18 UTC
I have been running West and graphite nuts in a Sherline and a Prazi
mill for several years with no problem. Altough recently my Prazi mill
is starting to make some squeaks on the Z axis.

see http://plsntcov.8m.com/Prazi.html or
http://plsntcov.8m.com/sherline.htm for details of my machines. The
sherline page details the use of the West nuts.

I agree Moglice is better, but if I have to remake the epoxy nuts every
few years I will still be way ahead of the Moglice price. I should look
for some moly powder.

ron ginger

Discussion Thread

turbulatordude 2006-09-08 08:54:59 UTC Epoxy nut ? Mike Pogue 2006-09-08 11:01:57 UTC Re: [CAD_CAM_EDM_DRO] Epoxy nut ? H & J Johnson 2006-09-08 11:14:30 UTC Re: [CAD_CAM_EDM_DRO] Epoxy nut ? turbulatordude 2006-09-08 12:48:20 UTC Re: Epoxy nut ? mpogue@z... 2006-09-08 14:49:17 UTC Re: [CAD_CAM_EDM_DRO] Re: Epoxy nut ? Tony Jeffree 2006-09-08 15:01:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Epoxy nut ? Dave Halliday 2006-09-08 20:23:27 UTC RE: [CAD_CAM_EDM_DRO] Epoxy nut ? vrsculptor 2006-09-08 20:49:54 UTC Re: Epoxy nut ? JanRwl@A... 2006-09-08 22:27:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Epoxy nut ? rllalonde2000 2006-09-09 04:10:51 UTC Re: Epoxy nut ? Ron Ginger 2006-09-09 06:00:18 UTC Re: Epoxy nut ? Graham Stabler 2006-09-09 07:55:11 UTC Re: Epoxy nut ? Graphite?? nielsenbe@a... 2006-09-09 11:55:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Epoxy nut ? Graphite?? turbulatordude 2006-09-09 22:13:42 UTC Re: Epoxy nut ? Graphite?? Graham Stabler 2006-09-10 02:27:14 UTC Re: Epoxy nut ? Graphite?? Dennis Schmitz 2006-09-10 04:33:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Epoxy nut ? Graphite?? Graham Stabler 2006-09-11 08:23:26 UTC Re: Epoxy nut ? Graphite?? Dennis Schmitz 2006-09-14 18:33:00 UTC Re: Epoxy nut ? Graphite?? Graham Stabler 2006-09-15 00:56:19 UTC Re: Epoxy nut ? Graphite?? Fernando 2006-09-15 09:14:50 UTC Re: Epoxy nut ? Graphite??