CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Gecko servos

Posted by james owens
on 2000-07-14 17:54:48 UTC
Hi Tim,

Which Goldmine motors have you got the encoders from as they list two G9932 and G9933
----- Original Message -----
From: Tim Goldstein
To: CAD_CAM_EDM_DRO@egroups.com
Sent: Saturday, July 15, 2000 12:05 AM
Subject: [CAD_CAM_EDM_DRO] Re: Gecko servos


While they are great little motors I don't think they will cut it on
my Shoptask. I have what I think are some NEMA 43 size servo motors
that I am planning on using with the Goldmine encoders. Should have
enough power to move the table. They are 4" diam x 6" long.

I'll be posting updates.

Tim
[Denver, CO]

> Sounds good so far, Keep us informed.
> Are you going to use those goldmine motors to power your mill/drill?
>
> Bill




[Non-text portions of this message have been removed]

Discussion Thread

james owens 2000-07-14 17:54:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Gecko servos Tim Goldstein 2000-07-14 20:09:57 UTC RE: [CAD_CAM_EDM_DRO] Re: Gecko servos james owens 2000-07-15 15:04:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Gecko servos Alvaro Fogassa 2000-07-15 18:09:18 UTC Re: Gecko servos Tim Goldstein 2000-07-15 20:00:35 UTC RE: [CAD_CAM_EDM_DRO] Re: Gecko servos Carlos Guillermo 2000-07-15 20:32:29 UTC 300 IPM - machine resolution and encoder slots Alvaro Fogassa 2000-07-15 20:32:58 UTC Re: Gecko servos Alvaro Fogassa 2000-07-15 20:51:59 UTC Re: 300 IPM - machine resolution and encoder slots Tim Goldstein 2000-07-15 22:03:09 UTC RE: [CAD_CAM_EDM_DRO] Re: Gecko servos Carlos Guillermo 2000-07-16 07:31:24 UTC RE: [CAD_CAM_EDM_DRO] Re: 300 IPM - machine resolution and encoder slots Doug Harrison 2000-07-16 09:11:39 UTC Re: [CAD_CAM_EDM_DRO] Re: 300 IPM - machine resolution and encoder slots