Re: [CAD_CAM_EDM_DRO] Re: Z-Axis problem - Not Enough Torque?
Posted by
WT
on 2006-11-09 03:09:05 UTC
Hi, Brentf_1.
Thanks for the info. Kindly look at my reply to "Brian Worth" in an earlier
post regarding why I may not need to counterweight my Z-axis.
Regards,
WT
Thanks for the info. Kindly look at my reply to "Brian Worth" in an earlier
post regarding why I may not need to counterweight my Z-axis.
Regards,
WT
----- Original Message -----
From: brentf_1
To: CAD_CAM_EDM_DRO@yahoogroups.com
Sent: Wednesday, November 08, 2006 11:19 PM
Subject: [CAD_CAM_EDM_DRO] Re: Z-Axis problem - Not Enough Torque?
on large gantry machines, on the z axis a counter weight is applied
so the net weight of the post is zero, this also helps on onesided
wear on the screw. it is usually executed as an presurized air
cylender.
Discussion Thread
WT
2006-11-08 03:11:07 UTC
Z-Axis problem - Not Enough Torque?
caudlet
2006-11-08 06:34:24 UTC
Re: Z-Axis problem - Not Enough Torque?
Brian Worth
2006-11-08 06:50:18 UTC
Re: [CAD_CAM_EDM_DRO] Z-Axis problem - Not Enough Torque?
WT
2006-11-08 07:10:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-Axis problem - Not Enough Torque?
WT
2006-11-08 07:20:17 UTC
Re: [CAD_CAM_EDM_DRO] Z-Axis problem - Not Enough Torque?
brentf_1
2006-11-08 07:22:56 UTC
Re: Z-Axis problem - Not Enough Torque?
Brian Worth
2006-11-08 08:22:21 UTC
Re: [CAD_CAM_EDM_DRO] Z-Axis problem - Not Enough Torque?
Chris Horne
2006-11-08 15:37:22 UTC
Re: Z-Axis problem - Not Enough Torque?
Tony Jeffree
2006-11-08 19:59:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-Axis problem - Not Enough Torque?
WT
2006-11-09 03:09:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-Axis problem - Not Enough Torque?
Horace, T.L.Ho
2006-11-09 03:16:45 UTC
Re: Z-Axis problem - Not Enough Torque?
WT
2006-11-09 03:21:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-Axis problem - Not Enough Torque?
WT
2006-11-09 03:28:22 UTC
Re: [CAD_CAM_EDM_DRO] Z-Axis problem - Not Enough Torque?
WT
2006-11-09 04:36:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-Axis problem - Not Enough Torque?
WT
2006-11-09 05:31:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-Axis problem - Not Enough Torque?
hannu venermo
2006-11-09 06:03:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-Axis problem - Not Enough Torque?
Chris Horne
2006-11-09 09:53:19 UTC
Re: Z-Axis problem - Not Enough Torque?
Tony Jeffree
2006-11-09 14:22:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-Axis problem - Not Enough Torque?
erich10983@a...
2006-11-09 15:14:09 UTC
Re: Z-Axis problem - Not Enough Torque?
Jim Fleig - CNC Services
2006-11-09 15:27:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-Axis problem - Not Enough Torque?
John Dammeyer
2006-11-09 16:33:49 UTC
RE: [CAD_CAM_EDM_DRO] Re: Z-Axis problem - Not Enough Torque?
kz1927
2006-11-09 16:46:38 UTC
Re: Z-Axis problem - Not Enough Torque?
Tony Jeffree
2006-11-09 20:55:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-Axis problem - Not Enough Torque?
Paul Kelly
2006-11-09 21:28:15 UTC
EMCO F1 controller
Ken Campbell
2006-11-09 22:18:28 UTC
Re: [CAD_CAM_EDM_DRO] EMCO F1 controller
WT
2006-11-10 05:52:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-Axis problem - Not Enough Torque?
WT
2006-11-10 07:03:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-Axis problem - Not Enough Torque?
WT
2006-11-10 07:21:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-Axis problem - Not Enough Torque?
WT
2006-11-11 00:07:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-Axis problem - Not Enough Torque?
Tony Jeffree
2006-11-11 02:23:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-Axis problem - Not Enough Torque?