RE: [CAD_CAM_EDM_DRO] Re: Treadmill motors as Servos

Hi Wayne

My 10 meters of 10mm wide 5mm tooth pitch belt is usually about £50 if
that’s any guide

Regs Mark



_____

From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Wayne Weedon
Sent: 11 November 2006 23:52
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re: Treadmill motors as Servos



Steve Blackmore wrote:

> www.hpcgears.com
>
> or try a local bearing stockist, mine carries all sorts of belts and
> pulleys and if he doesn't have it in stock, it will be next day ;)
>
>

Yes, sometimes HPC can save the day, and the prices are not always
horrendous.

I needed 2 sets of XL size pulleys 3/4" wide belts for the Hardinge.
No-one in the UK seems to have 3/4" on the shelf, and my local stockest
got a quote from a local manufacturer for these. £300 and 6 weeks
delivery! Needless to say I said I'd go elsewhere. HPC quoted 130 and
14 Days. They got the job..

Wayne...

--
----------------------------------------------------------
Wayne M Weedon Email: wayne@fdos-design. <mailto:wayne%40fdos-design.com>
com
Fdos Design Poole UK
Tel +44-1202-677025 Fax +44-1202-770515 Mobile: 07774 439915

Specialists in small batch & Production Mechanical/Electrical Engineering
----------------------------------------------------------





[Non-text portions of this message have been removed]