RE: [CAD_CAM_EDM_DRO] Cutting the Hex surfaces.

Hi Ron,

The stroboscopic effect showed the spinning cutter apparently frozen where
it was while cutting a flat so I'm sure the video interfered with showing
the actual operation of the rear cutter.

So you think the rear cutter is actually moving in and out rapidly? Way
back in a Model Engineer's Workshop article someone built a mechanism to
provide relief on hobs. It moved the X axis in and out on a cam IIRC. That
created a back relief smooth slope till the next cutting tooth.

I can see sync'ing up the cutter with the spindle so the cutter always
starts at the same spot for each flat. I'm just having trouble getting my
head around the geometry for cutting the flats.

I guess it's really motion in 5 axis (spindle X,Y and CutterHead X,Y)
combined to produce a straight line tangent to the Z axis?

I wonder if MACH3 can do this?

John Dammeyer

Wireless CAN with the CANRF module now available.
http://www.autoartisans.com/products
Automation Artisans Inc.
Ph. 1 250 544 4950

> -----Original Message-----
> From: CAD_CAM_EDM_DRO@yahoogroups.com
> [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of R Rogers
> Sent: Tuesday, December 26, 2006 11:09 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] Cutting the Hex surfaces.
>
>
> Hi John,
>
> It's all timing.
>
> Precision radial feedback of both, high acceleration,
> speeds and programming. It's cutters are timed with the
> spindle perfectly.
>
> The Camware they are using probably does all the radial
> calcs and X moves of the "Orange" turret. Or the "Orange"
> device may have some sort of programmable internal orb like a
> jig grinder, Would be virtually impossible to program by
> hand. Very impressive..
>
> Thats my guess.
>
> Ron
>
> John Dammeyer <johnd@...> wrote:
> Hi guys,
>
> http://www.youtube.com/watch?v=oGq-9NNmr3o
>
>
> Any idea on exactly how the rear orange spinning tool cuts the flats?
>
> John Dammeyer
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@...
> davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com
> to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider
> this to be a sister site to the CCED group, as many of the
> same members are there, for OT subjects, that are not allowed
> on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>