CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Servo Mill drill video

Posted by Dan Mauch
on 2007-04-22 12:16:39 UTC
Happy to hear you enjoyed it.
Dan Mauch
economical 3D scanner software and kits
low cost stepper and servo motors.
cases for Gecko drives
kits and assembled 3-4 axis drives
www.camtronics-cnc.com
www.seanet.com/~dmauch
----- Original Message -----
From: BRIAN FOLEY
To: CAD_CAM_EDM_DRO@yahoogroups.com
Sent: Sunday, April 22, 2007 11:55 AM
Subject: Re: [CAD_CAM_EDM_DRO] Servo Mill drill video


Hi, very nice, a lot of iron going fast and smooth, thanks for the video.
cul brian f.
----- Original Message -----
From: "Dan Mauch" <dmauch@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, April 22, 2007 2:32 PM
Subject: [CAD_CAM_EDM_DRO] Servo Mill drill video

> http://video.google.com/videoplay?docid=7735093752200071391
>
> I thought some of you would like to see Mach3 running my mill drill at 263
IPM.
> The motors are ID33005 7.5 lb in with 250 lines encoders and G320. Belt
drive with 2.12 to ratio connected to a 5 TPI ballscrew.
> I don't recommend running it that fast but is does show that you can do
when you have some time to play with the stuff you make.
> Dan Mauch
> economical 3D scanner software and kits
> low cost stepper and servo motors.
> cases for Gecko drives
> kits and assembled 3-4 axis drives
> www.camtronics-cnc.com
> www.seanet.com/~dmauch
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.463 / Virus Database: 269.5.7/771 - Release Date: 4/21/07
11:56 AM
>
>





[Non-text portions of this message have been removed]

Discussion Thread

Dan Mauch 2007-04-22 11:33:11 UTC Servo Mill drill video BRIAN FOLEY 2007-04-22 11:54:33 UTC Re: [CAD_CAM_EDM_DRO] Servo Mill drill video Dan Mauch 2007-04-22 12:16:39 UTC Re: [CAD_CAM_EDM_DRO] Servo Mill drill video Wayne Weedon 2007-04-22 12:46:33 UTC Re: [CAD_CAM_EDM_DRO] Servo Mill drill video vrsculptor 2007-04-22 16:43:00 UTC Re: Servo Mill drill video Harko Schwartz 2007-04-22 20:53:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Servo Mill drill video Mark Vaughan 2007-04-23 00:16:08 UTC RE: [CAD_CAM_EDM_DRO] Re: Servo Mill drill video Dan Mauch 2007-04-23 08:26:46 UTC Re: [CAD_CAM_EDM_DRO] Servo Mill drill video Doug M 2007-04-23 08:35:54 UTC Re: [CAD_CAM_EDM_DRO] Servo Mill drill video Wayne Weedon 2007-04-23 09:32:42 UTC Re: [CAD_CAM_EDM_DRO] Servo Mill drill video Doug M 2007-04-23 09:38:52 UTC Re: [CAD_CAM_EDM_DRO] Servo Mill drill video ballendo 2007-04-23 11:02:35 UTC Re: Servo Mill drill video David Speck 2007-04-23 16:03:07 UTC Re: [CAD_CAM_EDM_DRO] Servo Mill drill video Jon Elson 2007-04-23 20:35:38 UTC Re: [CAD_CAM_EDM_DRO] Servo Mill drill video