Re: [CAD_CAM_EDM_DRO] Adding a Tail shaft to servo's with no tail shaft

Roger I've been told by several people that if you don't pull them out for
too long that it doesn't effect them.. Apparently over time the magnets
will lose their "juice" if the rotor is pulled out for too long.. Only one
or two people have said they've had any kind of problems doing it.. I've
got them so I might as well try.. nothing to lose if it don't work.. :-)

Jarrett

> Jarrett,
> Its not good to pull the armature on permanent magnet DC motors. You
> may partially demagnatize them.
>
> Roger
>
>> Thanks Mark, how tough is it to pull the armature out of the motor
> to machine the shaft? I've got a machinist who I think would gladly
> tackle it but I don't want to wreck the motor by pulling it appart or
> something. Also, what is the reasoning behind the flex coupling to the
> encoder? I could see it if the tail wasn't running true but.. if it
> is..??
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.463 / Virus Database: 269.6.1/777 - Release Date: 4/26/2007
> 3:23 PM
>
>