RE: [CAD_CAM_EDM_DRO] Fanuc 3m help

What are the fanuc part numbers on the board? Part of
our business is parting out cnc components we might
have a main board around here somewhere, i know we
have a couple of loose 6m units more or less complete

--- Andrey Lipavsky <alipavsky@...> wrote:

> Nathan,
> Since you have to replace part of the controller,
> have you considered
> replacing all of it? Depending on the motors in
> your mill, Rutex or Gecko
> should do the trick. Your $1,000 budget should
> cover you for getting all 3
> axes converted.
>
> My two cents worth...
>
> Andrey Lipavsky
>
> Essex Jewelers
> 490 E. McMillan St.
> Studio 205
> Cincinnati, OH 45206
> (513) 826-0240
> www.essexjewelers.com
>
> -----Original Message-----
> From: CAD_CAM_EDM_DRO@yahoogroups.com
> [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf
> Of rocketscientistnate
> Sent: Tuesday, May 22, 2007 1:37 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Fanuc 3m help
>
> I just bought a Yuasa CNC mill off of ebay, and I
> need a little help
> getting it going. It is a 1981 model and has a
> Fanuc 3M control. I
> keep getting an error that means the Z encoder cable
> is disconnected,
> and following the troubleshooting guide in the
> manual (swapping cables
> and such) I've concluded the mainboard is bad. Does
> anybody know where
> I can get this repaired at a reasonable price (less
> than $1000)? Fanuc
> says it has a flat rate for repair on this board,
> I'm not sure how they
> do that, but was $2260. WOW! Anyway, I'd really
> like to get this thing
> going.
> Thanks
> Nathan Clymer
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe:
> CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@...
> davemucha@...
> [Moderators]
> URL to this group:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru
> Google.com to reach it if
> you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I
> consider this to be a
> sister site to the CCED group, as many of the same
> members are there, for OT
> subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
> DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>

____________________________________________________________________________________Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out.
http://answers.yahoo.com/dir/?link=list&sid=396545469