Re: [CAD_CAM_EDM_DRO] Video Probe Software

other qestion (-:

- How does it tackle slopes that is parallel to the laser.
- Are reflections of the object a problem for the software.

Best Regards
Kim Mortensen

2008/11/5 Kim Mortensen <kimfmx@...>

> Very cool project.
>
> What is the resolution... just thinking that the laser point is fairly
> thick.
>
> Best Regards
> Kim Mortensen
>
> 2008/11/5 Tom Hubin <thubin@...>
>
> Hello,
>>
>> A few months ago I designed and built a 3d Video Probe (aka Laser
>> Triangulation Gauge) for my Sherline 5410 CNC mill. Drawings and photos
>> below.
>>
>> So far I have only used it with Mach3. I would like to expand my
>> horizons and try other software to collect the data from the probe webcam.
>>
>> If you know of others that are writing CNC software for video probe
>> input, please point me to them.
>>
>> Tom Hubin
>> thubin@... <thubin%40earthlink.net>
>>
>> ******************
>>
>> Drawing of 3d Video Probe (aka Laser Triangulation Gauge):
>>
>> http://www.machsupport.com/forum/index.php/topic,5023.msg42913.html#msg42913
>>
>> Photos of 3d Video Probe on Sherline 5410 CNC mill:
>>
>> http://www.machsupport.com/forum/index.php/topic,5023.msg43641.html#msg43641
>>
>> Single pass point cloud of box end wrench:
>>
>> http://www.machsupport.com/forum/index.php/topic,6596.msg47404.html#msg47404
>>
>> Single pass point cloud of penny:
>>
>> http://www.machsupport.com/forum/index.php/topic,6596.msg47955.html#msg47955
>>
>> Two pass point cloud of a quarter:
>>
>> http://www.machsupport.com/forum/index.php/topic,6596.msg50294.html#msg50294
>>
>> Two pass point cloud of a dead cricket:
>>
>> http://www.machsupport.com/forum/index.php/topic,6596.msg51054.html#msg51054
>>
>>
>>
>
>

[Non-text portions of this message have been removed]