RE: Re: Cam program and post needed for a cnc propellor carving lathe

Do you have a link to a picture of these? And even better a video of someone
making them



From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Larry
Sent: Thursday, January 29, 2009 1:50 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: Cam program and post needed for a cnc
propellor carving lathe



I want to go with a lathe configuration because it will machine both
top and bottom of the blade. A router or mill will do only one side of
the blade at a time. I think this method will have a faster cycle time
with less fuss. And the saw blade can be changed if necessary to a
vertical belt sander for finishing.
Thanks, Larry reiss Omaha, Nebraska

-- In CAD_CAM_EDM_DRO@yahoogroups.com
<mailto:CAD_CAM_EDM_DRO%40yahoogroups.com> , Jack McKie
<freshwatermodels@...> wrote:

>
> Larry,
>
> Might be easier to just go with a 3 axis CNC router and ordinary

cad/cam software. The cnc router might also be useable for other parts.

>
> Another old fashioned alternative would be a duplicating mill which

allows you to duplicate a hand made blade.

>
> Jack
>
> --- On Thu, 1/29/09, Larry <reiss_machinist@...> wrote:
>
> From: Larry <reiss_machinist@...>
> Subject: [CAD_CAM_EDM_DRO] Cam program and post needed for a cnc

propellor carving lathe

> To: CAD_CAM_EDM_DRO@yahoogroups.com

<mailto:CAD_CAM_EDM_DRO%40yahoogroups.com>

> Date: Thursday, January 29, 2009, 1:26 PM
>
>
>
>
>
>
> I am interested in building a cnc propellor carving lathe to create
> wooden wind turbine blades, one blade at a time. The proposed lathe
> would be run with Mach 3 and 2 axis control having a servo motor
> drive on the headstock spindel and one on the cross slide axis. There
> would be gearing and a lead screw to slave the Z axis from the spindel
> at the rate of .125" per revolution.The cutting tool would be a 10"
> dia. carbide table saw blade that would move in and out on the cross
> slide X axis as the spindel rotated continuously.
> I have use of a program that will create an STL. file of the
> blade.But I need to learn of a cam program that will let me define the
> axis of rotation and has a post processor for a machine of this
> configuration.
> Thank You, Larry Reiss Omaha, Nebraska
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]