Re: [CAD_CAM_EDM_DRO] Mach3 problem
Posted by
Steve Blackmore
on 2009-03-13 01:18:57 UTC
On Thu, 12 Mar 2009 17:59:43 -0700 (PDT), you wrote:
exact stop mode which may be desirable for some cutting actions. It's
only a warning NOT an error. All that does is warn you that your machine
is going to do something that is a not a default for your config/setup.
Steve Blackmore
--
>Yes, it reads "exact stop VS CV".All that is telling you is that something in your program is changing to
exact stop mode which may be desirable for some cutting actions. It's
only a warning NOT an error. All that does is warn you that your machine
is going to do something that is a not a default for your config/setup.
Steve Blackmore
--
Discussion Thread
Jack Mc Kie
2009-03-12 11:06:44 UTC
Mach3 problem
Henrik Olsson
2009-03-12 11:20:29 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 problem
Steve Blackmore
2009-03-12 15:44:26 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 problem
Jack McKie
2009-03-12 17:59:47 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 problem
Steve Blackmore
2009-03-13 01:18:57 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 problem
Jack McKie
2009-03-13 04:26:09 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 problem
Lester Caine
2009-03-13 04:43:37 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 problem
Jack McKie
2009-03-13 06:37:49 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 problem
Lester Caine
2009-03-13 07:07:48 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 problem
Jack McKie
2009-03-13 08:57:43 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 problem
Henrik Olsson
2009-03-13 09:18:55 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 problem
Stephen Wille Padnos
2009-03-13 09:44:20 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 problem
Jack McKie
2009-03-13 09:58:57 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 problem
Steve Blackmore
2009-03-13 13:43:08 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 problem
Steve Blackmore
2009-03-13 13:44:04 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 problem
Steve Blackmore
2009-03-13 13:45:24 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 problem
Stephen Wille Padnos
2009-03-13 13:47:48 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 problem