CAD CAM EDM DRO - Yahoo Group Archive

Re: Spindle alternative from noise view

Posted by balsanu_gabi
on 2009-09-22 18:15:58 UTC
Hi Mark,

Thank you for pointing me to another Proxxon unit (German quality). That spindle came with a 43 neck, right?
It looks like a plate with neck included
Do you have dimension for the back hole's for that plate ?
Any chance to find a draw with dimension's for entire neck?

Thank you in advance.
Gabi



--- In CAD_CAM_EDM_DRO@yahoogroups.com, "fourthaxis4000" <fourthaxis4000@...> wrote:
>
> Gabi,
> In the cutter diameter range you mention, you could consider the Proxxon 20165, which comes with a 43mm neck diameter for mounting, six collets up to 6mm and variable speed 900>6000rpm.
> At first glance it looks like a high speed router, but it's not. The included controller supplies PWM DC to the spindle, which is a low-speed milling head, direct drive without gearing.
> https://www.proxxon-world.com/product/direct_drive_spindle_armature_bfw_40_e_suit_bfb_2000_220-240v
>
> Larger cutters above 6mm would need reduced shanks as 6mm is the largest available collet. As for noise, I run one of these on a converted mill and it's almost deathly silent.
> Mark B
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "balsanu_gabi" <gabi.balsanu@> wrote:
> >
> > Hi to all,
> >
> > I have a Taig CNC mill with a Proxxon IB/E unit for spindle. I am very happy with that from accuracy and NOISE level point of view.
> > Now I want to buy a bigger mill with a bigger spindle. My need's for spindle are:
> > - variable speed (like Proxxon);
> > - 1-12mm dia tool capacity
> > - alum, brass and wood material for milling
> > - most important - LOW NOISE LEVEL
> > Noise level must be low because I will run my mill in my flat.
> > What choice do I have?
> >
> > Regards
> > Gabi
> >
>

Discussion Thread

balsanu_gabi 2009-09-15 05:58:07 UTC Spindle alternative from noise view fourthaxis4000 2009-09-19 16:12:16 UTC Re: Spindle alternative from noise view Danny Miller 2009-09-19 20:40:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Spindle alternative from noise view Jon Elson 2009-09-20 09:39:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Spindle alternative from noise view Peter Reilley 2009-09-20 10:22:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Spindle alternative from noise view Jon Elson 2009-09-20 17:05:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Spindle alternative from noise view David LeVine 2009-09-20 19:54:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Spindle alternative from noise view balsanu_gabi 2009-09-22 18:15:58 UTC Re: Spindle alternative from noise view harko_perkasie 2009-09-23 04:15:52 UTC Re: Spindle alternative from noise view Mark Bingham 2009-09-24 01:38:04 UTC Re: Spindle alternative from noise view