Re: [CAD_CAM_EDM_DRO] Threads on a ball screw........

David,
 
Yes, an interference fit would work but the nice thing about the goop is that the part can be removed easily if need be.   Another issue is that this ball screw was a bugger to machine, even with carbide tool so the surface isn't all that great.   I have machined "press fits" in steel and iron that were pretty tight with about .0005-.001" interference but they are tricky.   The goop is supposed to hold about 3000psi in shear.   Machining these ball screws isn't fun and at least for me, this is a simple solution.
 
Jack

--- On Tue, 2/23/10, David G. LeVine <dlevine@...> wrote:


From: David G. LeVine <dlevine@...>
Subject: Re: [CAD_CAM_EDM_DRO] Threads on a ball screw........
To: CAD_CAM_EDM_DRO@yahoogroups.com
Date: Tuesday, February 23, 2010, 2:26 PM


 



Jack wrote:
>
>
>
> I have converted my minimill to ball screws but was having problems with
> shaft collars shifting causing backlash. The solution was to fit a nut
> to lock the collar in place. I had trouble with both my lathe and the
> hard material in turning the thread and spoiled the thread. The
> solution was to turn down the shaft in that area. Drill out and cut off
> a bolt to form a threaded sleeve. The sleeve is attached with sleeve
> retaining goop. Assuming the goop holds the sleeve this is a simple
> way to put threads on the ball screw and I plan on using the method in
> the future since it was quick and simple. I thought this might be of
> use to someone in the group.
>
> Jack
>

Actually, if you can machine closely enough, heating the threaded part
and cooling the ball screw will allow you to press the screw onto the
shaft. Shrink fits (like the one described) are VERY secure, they must
be machined off to remove them! And, no, I don't know what the
interference fit would have to be, but given the dimensions it should be
pretty easy to find out.

--
This email, including any attached files, may contain confidential and privileged information for the sole use of the intended recipient(s) . Any review, use, distribution or disclosure by others, except for the purpose of determining the correct recipent and the sender, is strictly prohibited. Distribution of sensitive technical material may violate applicable export and trade laws. If you are not the intended recipient or authorized to receive information for the recipient(s) , please contact the sender by reply email and delete all copies of this message. E-mail may be susceptible to data corruption, interception, unauthorized amendment, viruses and delays or the consequences thereof. Accordingly this e-mail and any attachments are opened at your own risk. Nothing in this message should be construed as a digital or electronic signature or as a binding contract.

David G. LeVine
12 Clairmoor Drive
Nashua, NH 03060











[Non-text portions of this message have been removed]