CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Wire gauge for wiring cnc controllers

Posted by Tony Smith
on 2010-09-22 02:32:43 UTC
> I have bought 4 pole connectors similar to this (mine have screw-on
> rings) to
> connect from the control enclosure to the stepper motors [
> http://www.parts-express.com/pe/showdetl.cfm?Partnumber=092-034 ] The
> wire I
> have used to wire the internals of the controller is from a pc power
> supply, the
> external thicker wires, which are multi-strand wires. I am going to
> purchase a 4
> conductor flexible cable to make the leads to the actual motors. Will I
> be right
> in assuming they can be the same gauge as the wires coming out the
> stepper
> motor?


For the controller those wires would be fine.

Someone previously mentioned flexibility depends on the number of strands in
the wire, and that's correct. I've got some wire with 512 strands, and it's
very flexible. The vacuum cleaner lead mentioned bends quite well too, I
haven't cut one apart to see what it's made up of.

Tony

Discussion Thread

Brian 2010-09-18 00:17:35 UTC Wire gauge for wiring cnc controllers Danny Miller 2010-09-18 02:35:47 UTC Re: [CAD_CAM_EDM_DRO] Wire gauge for wiring cnc controllers Tony Smith 2010-09-18 04:09:43 UTC RE: [CAD_CAM_EDM_DRO] Wire gauge for wiring cnc controllers Lester Caine 2010-09-18 06:27:22 UTC Re: [CAD_CAM_EDM_DRO] Wire gauge for wiring cnc controllers Randy Abernathy 2010-09-18 08:01:50 UTC RE: [CAD_CAM_EDM_DRO] Wire gauge for wiring cnc controllers Dan Mauch 2010-09-18 09:05:26 UTC Wire gauge for wiring cnc controllers turbulatordude 2010-09-18 09:19:06 UTC Re: Wire gauge for wiring cnc controllers Dave Halliday 2010-09-21 23:00:11 UTC RE: [CAD_CAM_EDM_DRO] Wire gauge for wiring cnc controllers Brian Worth 2010-09-22 01:15:27 UTC Re: [CAD_CAM_EDM_DRO] Wire gauge for wiring cnc controllers Danny Miller 2010-09-22 01:42:07 UTC Re: [CAD_CAM_EDM_DRO] Wire gauge for wiring cnc controllers Tony Smith 2010-09-22 02:32:43 UTC RE: [CAD_CAM_EDM_DRO] Wire gauge for wiring cnc controllers wanliker@a... 2010-09-22 09:30:36 UTC Wire gauge for wiring cnc controllers