Re: [CAD_CAM_EDM_DRO] Re: reprap build started
Posted by
Jon Elson
on 2011-10-11 21:59:32 UTC
alenz@... wrote:
not work out
so well. Of course, you could just keep it slow enough that the
Sherline was not
exceeding its limits. 125 mm/sec is 295 IPM, or 5905 RPM on a 20 TPI
leadscrew!
Jon
> Alan, I would be first in line to help develop a prototype for a Sherline Machine!Well, at these 50 mm/sec up to 125 mm/sec speeds, a Sherline base might
> Alas I'm afraid the technology is over my head tho so probably wouldn't be much help:
not work out
so well. Of course, you could just keep it slow enough that the
Sherline was not
exceeding its limits. 125 mm/sec is 295 IPM, or 5905 RPM on a 20 TPI
leadscrew!
Jon
Discussion Thread
Kevin Martin
2011-10-09 08:24:58 UTC
RE: [CAD_CAM_EDM_DRO] reprap build started
Mike Payson
2011-10-09 13:38:30 UTC
Re: [CAD_CAM_EDM_DRO] reprap build started
Kevin Martin
2011-10-09 15:45:57 UTC
RE: [CAD_CAM_EDM_DRO] reprap build started
Mike Payson
2011-10-09 17:57:57 UTC
Re: [CAD_CAM_EDM_DRO] reprap build started
Kevin Martin
2011-10-10 07:31:23 UTC
RE: [CAD_CAM_EDM_DRO] reprap build started
Mike Payson
2011-10-10 11:50:09 UTC
Re: [CAD_CAM_EDM_DRO] reprap build started
Kevin Martin
2011-10-10 17:31:46 UTC
RE: [CAD_CAM_EDM_DRO] reprap build started
Mike Payson
2011-10-10 18:00:39 UTC
Re: [CAD_CAM_EDM_DRO] reprap build started
Alan
2011-10-10 18:00:43 UTC
RE: [CAD_CAM_EDM_DRO] reprap build started
Alan
2011-10-11 12:30:50 UTC
RE: [CAD_CAM_EDM_DRO] reprap build started
Kevin Martin
2011-10-11 13:01:41 UTC
RE: [CAD_CAM_EDM_DRO] reprap build started
Alan
2011-10-11 14:04:01 UTC
RE: [CAD_CAM_EDM_DRO] reprap build started
Jon Elson
2011-10-11 18:25:47 UTC
Re: [CAD_CAM_EDM_DRO] reprap build started
Mike Payson
2011-10-11 19:02:31 UTC
Re: [CAD_CAM_EDM_DRO] reprap build started
KM6VV
2011-10-11 19:45:08 UTC
Re: [CAD_CAM_EDM_DRO] reprap build started
alenz@b...
2011-10-11 20:24:29 UTC
Re: reprap build started
KM6VV
2011-10-11 20:53:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: reprap build started
Jon Elson
2011-10-11 21:56:04 UTC
Re: [CAD_CAM_EDM_DRO] reprap build started
Jon Elson
2011-10-11 21:59:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: reprap build started
Kevin Martin
2011-10-11 22:24:34 UTC
RE: [CAD_CAM_EDM_DRO] reprap build started
Kevin Martin
2011-10-11 22:37:39 UTC
RE: [CAD_CAM_EDM_DRO] reprap build started
Mike Payson
2011-10-11 22:59:20 UTC
Re: [CAD_CAM_EDM_DRO] reprap build started
Ron Ginger
2011-10-12 05:24:52 UTC
Re: reprap build started
Ron Thompson
2011-10-12 05:32:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: reprap build started
Dan Mauch
2011-10-12 06:41:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: reprap build started
Dan Mauch
2011-10-12 07:34:21 UTC
RE: [CAD_CAM_EDM_DRO] Re: reprap build started
Jon Elson
2011-10-12 10:02:39 UTC
Re: [CAD_CAM_EDM_DRO] reprap build started
Alan
2011-10-12 10:06:48 UTC
RE: [CAD_CAM_EDM_DRO] Re: reprap build started
Alan
2011-10-12 11:12:07 UTC
RE: [CAD_CAM_EDM_DRO] Re: reprap build started
Mike Payson
2011-10-12 11:24:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: reprap build started
Alan
2011-10-12 11:29:36 UTC
RE: [CAD_CAM_EDM_DRO] Re: reprap build started
Alan
2011-10-12 13:38:16 UTC
RE: [CAD_CAM_EDM_DRO] Re: reprap build started
David G. LeVine
2011-10-15 12:25:59 UTC
Re: [CAD_CAM_EDM_DRO] reprap build started
Jon Elson
2011-10-15 15:39:39 UTC
Re: [CAD_CAM_EDM_DRO] reprap build started