Re: [CAD_CAM_EDM_DRO] Hurco KM-3 retrofit
Posted by
Jon Elson
on 2012-05-18 18:21:57 UTC
Ron Thompson wrote:
interface to the
servo amps. What make are the servo amps, Hurco used commercial units from
the likes of Servo Dynamics or Westamp, IIRC.
Jon
> A neighbor asked me for help with the above machine. He is helpingOr, you could use the Pico Systems PPMC or a board from Mesa to
> another fellow who has bought the Galil DCM-1842 PCI card and ICM-2900
> screw terminal board. He also has the cable to hook these together.
> He would like to use the existing servo amps, but documentation is scarce.
> Can anyone help with pin outs or any other info of the Hurco servomate
> drivers?
> Failing that, would the next best option be to gut the box and use Gecko
> G320X amps?
>
interface to the
servo amps. What make are the servo amps, Hurco used commercial units from
the likes of Servo Dynamics or Westamp, IIRC.
Jon
Discussion Thread
Ron Thompson
2012-05-18 14:57:57 UTC
Hurco KM-3 retrofit
David G. LeVine
2012-05-18 18:21:30 UTC
Re: [CAD_CAM_EDM_DRO] Hurco KM-3 retrofit
Jon Elson
2012-05-18 18:21:57 UTC
Re: [CAD_CAM_EDM_DRO] Hurco KM-3 retrofit
Ron Thompson
2012-05-18 18:41:13 UTC
Re: [CAD_CAM_EDM_DRO] Hurco KM-3 retrofit
Ron Thompson
2012-05-18 18:44:07 UTC
Re: [CAD_CAM_EDM_DRO] Hurco KM-3 retrofit
Jon Elson
2012-05-18 20:52:30 UTC
Re: [CAD_CAM_EDM_DRO] Hurco KM-3 retrofit
Ron Thompson
2012-05-19 05:30:18 UTC
Re: [CAD_CAM_EDM_DRO] Hurco KM-3 retrofit
David G. LeVine
2012-05-19 09:42:29 UTC
Re: [CAD_CAM_EDM_DRO] Hurco KM-3 retrofit
Jon Elson
2012-05-19 11:43:46 UTC
Re: [CAD_CAM_EDM_DRO] Hurco KM-3 retrofit
Ron Thompson
2012-05-19 12:24:56 UTC
Re: [CAD_CAM_EDM_DRO] Hurco KM-3 retrofit
Jon Elson
2012-05-19 17:46:03 UTC
Re: [CAD_CAM_EDM_DRO] Hurco KM-3 retrofit