Re: [CAD_CAM_EDM_DRO] Hurco KM-3 retrofit

On 5/18/2012 9:20 PM, Jon Elson wrote:

>
> Ron Thompson wrote:
> > A neighbor asked me for help with the above machine. He is helping
> > another fellow who has bought the Galil DCM-1842 PCI card and ICM-2900
> > screw terminal board. He also has the cable to hook these together.
> > He would like to use the existing servo amps, but documentation is
> scarce.
> > Can anyone help with pin outs or any other info of the Hurco servomate
> > drivers?
> > Failing that, would the next best option be to gut the box and use
> Gecko
> > G320X amps?
> >
> Or, you could use the Pico Systems PPMC or a board from Mesa to
> interface to the
> servo amps. What make are the servo amps, Hurco used commercial units from
> the likes of Servo Dynamics or Westamp, IIRC.
>
> Jon
>

Thanks, Jon.
The servo drives are bare boards inside the cabinet. There is a label
that says Servomate and 90 VDC.
The problem is which pins to use?

--


Ron Thompson
On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA

Think, Draw, Print. 3D printers ROCK!

http://www.plansandprojects.com/My%20Machines/PrusaMendel2012-1/

http://www.plansandprojects.com My hobby pages are here:
http://www.plansandprojects.com/My%20Machines/

Visit the castinghobby FAQ:
http://castinghobbyfaq.bareboogerhost.com/









[Non-text portions of this message have been removed]