Re: [CAD_CAM_EDM_DRO] Hurco KM-3 retrofit

On 5/19/2012 2:42 PM, Jon Elson wrote:

>
> Ron Thompson wrote:
> >>
> > Thanks again, Jon.
> > I had found this, but not much else. The PDF seems to be the correct
> > info for the drives. I'll know more on the next visit.
> >
> >
> It definitely shows how to connect the command input and tach, and shows
> some of
> the limit switch connections. I don't know if it has the enable and
> fault signals on
> that doc. That should be all you need.
>
> Jon
>

Is the command input the 10V analog?

--


Ron Thompson
On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA

Think, Draw, Print. 3D printers ROCK!

http://www.plansandprojects.com/My%20Machines/PrusaMendel2012-1/

http://www.plansandprojects.com My hobby pages are here:
http://www.plansandprojects.com/My%20Machines/

Visit the castinghobby FAQ:
http://castinghobbyfaq.bareboogerhost.com/









[Non-text portions of this message have been removed]