RE: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
Posted by
Dave Halliday
on 2012-12-26 08:45:14 UTC
How about the Electronic Lead Screw -- Google it or go here:
http://www.autoartisans.com/ELS/
<u only gripe is that you are locked into that configuration where with a
computer running MACH or LinuxCNC, you can change your configuration as
needed.
That being said, if you are doing a single-task machine with no intention of
changing it, this would be a viable option.
Dave
http://www.autoartisans.com/ELS/
<u only gripe is that you are locked into that configuration where with a
computer running MACH or LinuxCNC, you can change your configuration as
needed.
That being said, if you are doing a single-task machine with no intention of
changing it, this would be a viable option.
Dave
> -----Original Message-----
> From: CAD_CAM_EDM_DRO@yahoogroups.com
> [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of scyvt
> Sent: Wednesday, December 26, 2012 07:18
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
>
>
>
>
>
>
> Jon
>
> Not long ago I asked this group if there was a simple
> hardware/software solution for single axis control. There
> were two answers: 1) just use use a cheap computer running
> Mach, and ignore the excess capacity, and 2) hang on for
> Mariss to release the long-awaited FPGA-based drive that
> would (maybe) have that capability built-in.
>
> Would perhaps the board & Linuxcnc that you recommend be a
> third path to consider for this application?
>
> TIA
> Steve
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, Jon Elson <elson@...> wrote:
>
> The Intel Atom CPU on the D525MW board is only
> > slightly more
> > expensive, and is a tested solution with a "factory" download. See
> > www.linuxcnc.org for more info.
> >
> > The D525MW has a standard parallel port, so you can run
> software step
> > generation
> > if you must, or several controller/interfaces that connect
> through the
> > parallel port.
> >
> > I've been using EMC, then EMC2 and now LinuxCNC for 14
> years now, it is
> > a very professional and reliable motion control package, and I have
> > never had it
> > fail in that time.
> >
> > Jon
>
>
>
>
> ------------------------------------
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@...
> davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com
> to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider
> this to be a sister site to the CCED group, as many of the
> same members are there, for OT subjects, that are not allowed
> on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
> bill
> List Mom
> List Owner
>
> Yahoo! Groups Links
>
>
>
Discussion Thread
Peter
2012-12-22 21:07:50 UTC
Raspberry Pi for CADCAM CNC?
Dave Halliday
2012-12-22 22:53:27 UTC
RE: [CAD_CAM_EDM_DRO] Raspberry Pi for CADCAM CNC?
Peter
2012-12-23 05:04:57 UTC
Re: Raspberry Pi for CADCAM CNC?
Dave Halliday
2012-12-23 07:54:29 UTC
RE: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
jeremy youngs
2012-12-23 08:03:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
Dave Halliday
2012-12-23 08:39:59 UTC
RE: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
jeremy youngs
2012-12-23 13:49:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
David G. LeVine
2012-12-23 14:43:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
Stephen Kandul
2012-12-23 15:10:23 UTC
Re: Raspberry Pi for CADCAM CNC?
Jon Elson
2012-12-23 21:05:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
Stephen Kandul
2012-12-24 09:21:35 UTC
Re: Raspberry Pi for CADCAM CNC?
samcoinc2001
2012-12-24 10:25:12 UTC
Re: Raspberry Pi for CADCAM CNC?
Jon Elson
2012-12-24 11:25:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
David G. LeVine
2012-12-24 16:15:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
scyvt
2012-12-25 06:41:24 UTC
Re: Raspberry Pi for CADCAM CNC?
jeremy youngs
2012-12-25 09:35:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
Jon Elson
2012-12-25 19:32:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
Jon Elson
2012-12-25 19:38:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
Steve Clay-Young
2012-12-26 07:02:00 UTC
Re: Raspberry Pi for CADCAM CNC?
scyvt
2012-12-26 07:18:34 UTC
Re: Raspberry Pi for CADCAM CNC?
Roland Jollivet
2012-12-26 08:30:42 UTC
[CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
Dave Halliday
2012-12-26 08:45:14 UTC
RE: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
David G. LeVine
2012-12-26 12:44:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
Jon Elson
2012-12-26 12:48:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
David G. LeVine
2012-12-26 12:54:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
R.L. Wurdack
2012-12-26 14:54:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
Elliot B
2012-12-27 10:05:24 UTC
Re: Raspberry Pi for CADCAM CNC?
Jon Elson
2012-12-27 17:27:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
Elliot B
2012-12-28 08:19:02 UTC
Re: Raspberry Pi for CADCAM CNC?
Jon Elson
2012-12-28 08:27:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC?
Doug Fortune
2013-03-08 13:14:07 UTC
Re: Raspberry Pi for CADCAM CNC? - first task .... realtime RasPi
Vince Negrete
2013-03-09 14:12:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC? - first task .... realtime RasPi
David G. LeVine
2013-03-10 21:30:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC? - first task .... realtime RasPi
Vince Negrete
2013-03-11 10:09:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC? - first task .... realtime RasPi
kinsamanka@y...
2013-03-13 07:08:09 UTC
Re: Raspberry Pi for CADCAM CNC? - first task .... realtime RasPi
John Dammyer
2013-03-13 09:19:56 UTC
RE: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC? - first task .... realtime RasPi
Vince Negrete
2013-03-13 11:12:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC? - first task .... realtime RasPi
kinsamanka@y...
2013-03-13 16:38:05 UTC
Re: Raspberry Pi for CADCAM CNC? - first task .... realtime RasPi
Vince Negrete
2013-03-13 18:46:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC? - first task .... realtime RasPi
kinsamanka@y...
2013-03-16 06:39:37 UTC
Re: Raspberry Pi for CADCAM CNC? - first task .... realtime RasPi
kinsamanka@y...
2013-03-16 06:39:44 UTC
Re: Raspberry Pi for CADCAM CNC? - first task .... realtime RasPi
Scott A Tovey
2013-03-16 06:45:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC? - first task .... realtime RasPi
Vince Negrete
2013-03-16 11:21:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC? - first task .... realtime RasPi
Vince Negrete
2013-03-16 11:44:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Raspberry Pi for CADCAM CNC? - first task .... realtime RasPi