Re: [CAD_CAM] Keyless Bushings
Posted by
Hugh Currin
on 2000-08-19 14:08:39 UTC
Bob & All:
At 01:21 PM 8/19/00 -0500, Bob Campbell wrote:
they've worked well. You might also look at Fenner:
www.fennerdrives.com/fdHOME.NSF/industrial/trantorque.html
I think these are available through MSC Industrial Supply which may
be easier for small quantities. Also may be available through local
bearing houses.
Hugh
--------------------------------
Hugh & Denise Currin
currin@...
Klamath Falls, Oregon USA
541/884-3023
--------------------------------
At 01:21 PM 8/19/00 -0500, Bob Campbell wrote:
>Thanks for the ideas. I looked at the new shaftloc and it is what I amI've used similar keyless bushings on other projects (non CNC) and
>looking for.
>
>Bob Campbell
they've worked well. You might also look at Fenner:
www.fennerdrives.com/fdHOME.NSF/industrial/trantorque.html
I think these are available through MSC Industrial Supply which may
be easier for small quantities. Also may be available through local
bearing houses.
Hugh
--------------------------------
Hugh & Denise Currin
currin@...
Klamath Falls, Oregon USA
541/884-3023
--------------------------------
Discussion Thread
Doug Harrison
2000-08-18 17:22:52 UTC
Re: [CAD_CAM_EDM_DRO] Stepper motors
Alan Marconett KM6VV
2000-08-18 17:50:40 UTC
Re: [CAD_CAM_EDM_DRO] Stepper motors
Bob Campbell
2000-08-18 18:06:16 UTC
Re: [CAD_CAM_EDM_DRO] Stepper motors
ptengin@a...
2000-08-18 19:29:49 UTC
Re: [CAD_CAM_EDM_DRO] Stepper motors
JanRwl@A...
2000-08-18 21:29:12 UTC
Re: [CAD_CAM_EDM_DRO] Stepper motors
JanRwl@A...
2000-08-18 21:44:07 UTC
Re: [CAD_CAM_EDM_DRO] Stepper motors
hans
2000-08-18 22:05:29 UTC
Re: [CAD_CAM_EDM_DRO] Stepper motors
Bob Campbell
2000-08-19 11:15:35 UTC
Re: [CAD_CAM_EDM_DRO] Stepper motors
Hugh Currin
2000-08-19 14:08:39 UTC
Re: [CAD_CAM] Keyless Bushings